Feeds

In this quiz, you’ll test your understanding of Pydantic. Pydantic is a powerful data validation library for Python. You can also use a related library, pydantic-settings, for settings management.

By working through this quiz, you’ll revisit how to work with data schemas with Pydantic’s BaseModel, write custom validators for complex use cases, validate function arguments with Pydantic’s @validate_call, and manage settings and configure applications with pydantic-settings.

[ Improve Your Python With 🐍 Python Tricks 💌 – Get a short & sweet Python Trick delivered to your inbox every couple of days. >> Click here to learn more and see examples ]

The « hello world » example is about standing on the shoulders of the giant and learn how to use function as tools.

Most coders will use print during their whole life without actually coding it. However, it is a fun exercise.

The framebuffer

Given you are on linux you probably have a device named /dev/fb0 if you don't, you can't do this. The framebuffer is a view of the linear graphical memory used by your video card where what you see on the screen is stored ... at the condition you are in console mode and you have the rights.

On my debian centric distribution, to give the_user permissions to write in the framebuffer I must add the_user to group_video. This can be done with sudo adduser the_user video or sudo vigr.

Then, you have to be in console mode. To switch from xorg/wayland to the console back and forth I use the Ctrl + Alt + Fn combination to switch off from X and Alt + Fn to switch back to X (it's called switching the virtual console).

Once this is done you check you have rights by doing cat /dev/urandom > /dev/fb0 which should fill your screen with random colors and insult you stating there is no more room left on the device. SNAFU : everyhting works as intended.


The pixel

Framebuffer don't know about pixels made of Red, Green, Blue and alpha (given you have a video card that is less than 20 years old), they are just made of memory. We will have to slowly build up our understanding of what this is all about.

The in memory layout may differ according to the hardware, some are having a RGBA layout, mine, the i915 is having a BGRA layout. The following example may need to be rewritten with different hardware if the output is not consistent with your assumption.

Determining the memory layout and coordinates

We will do a test and validate code session : first we make assumption on where the colours are by writting 3 squares of Red, Blue and Green on the screen, then, we will snapshot the screen.

$ cat fb.py #!/usr/bin/env python3 from struct import pack w,h =map(int, open("/sys/class/graphics/fb0/virtual_size").read().split(",")) midx = w//2 midy = h//2 encode = lambda b,g,r,a : pack("4B",b,g,r,a) with open("/dev/fb0", "wb") as f: for y in range(0,h): for x in range(0,w): f.write(encode( not x%100 and 0xA0 or x<midx and 0xFF or 0, #blue y<midy and 0xFF or 0, #green x>midx and y>midy and 0xFF or 0, #red 0, )) The only « trick » is the use of pack to encode the four colour bytes in a byte array that is written to the framebuffer filehandler. If the code works correctly we should validate the following assumptions:

• coordinates are such as 0 is top left of the screen where green and blue should superpose
• my 1920x1080 screen should have 19 weired stripes (hence validating the geometry)
• each colours should be in its square, red bottom right, green top right, blue bottom left.
• RAM as a char device is accessing a low level file

And if the world is consistent we can read from the framebuffer and snapshot it in the most trivial picture encoding witch is Portable PixMap format. A portable Pixmap is made of

• a magic number P3 followed by
• width
• height
• the maximum colour value (here 255)
• the 3 colour bytes Red, Blue, Green without Alpha value per pixel

The code for this is straigh forward : $ cat snap.py #!/usr/bin/env python from struct import unpack w,h = map( int,open("/sys/class/graphics/fb0/virtual_size").read().split(",")) # returns b g r a decode = lambda pixel : unpack("4B", pixel) def pr(b,g,r,a): print("%d %d %d" % (r,g,b)) print(f"""P3 {w} {h} 255 """) with open("/dev/fb0", "rb") as fin: while pixel := fin.read(4): pr(*decode(pixel)) Here the only trick is we use the symetrical function of pack, unpack to decode the pixel in the four colour bytes.

wrapping up part one

Asumming you can install fim the framebuffer image wiewer and you installed imagemagick : you can now do ./fb.py && snap.py > this.ppm && convert this.ppm this.jpg && fim this.jpg Doing so, you should have the same picture showing twice without an error like this : As an exercise, you can vary the fb.py to make funny output, or code a PPM viewer that print back your ppm to the screen.

Hello again, sorry it’s been a while since the last post. In this case, I’m doing a never-before-seen multi-month post!

This may be the last post in this series, as the KDE Promo team has launched “This Week in KDE Apps” which covers my work here (and I also have plans to contribute to… 😅) Nate Graham typically reports on my Plasma changes in his “This Week in Plasma” series. All that would be left is the uninteresting changes, so I was thinking it might be more sensible to do an emersion-style “Status update” that’s isn’t strictly KDE related. We’ll see!

Plasma #

Feature You can now tweak the pen pressure. This is useful if you prefer a specific style to your strokes, and you can’t change this directly in your preferred application. We plan to have add “soft” and “hard” presets to make using the curve easier. This is one of the last items paid for by our NLnet grant, so it’s exciting to see it finally come to fruition! 6.3

The new pen pressure control in the Drawing Tablet KCM.

Feature The stylus cursor is now hidden on the Calibration page but this will only work once your distribution switches to Qt 6.8. The credit belongs to Nicolas Fella as he’s the one who put in the work upstream in Qt! 6.2.1

Bugfix The calibration accuracy is now improved slightly and refining your existing calibration further should work closer to how you expect. 6.2.1

Bugfix Added more safety rails in the Calibration code to prevent possible crashes. 6.2.1

Bugfix Made sure the calibration matrix is reset when you hit the “Defaults” button. 6.2.1

Bugfix Now the Calibration window opens on the correct screen. 6.2.1

Bugfix Now the action dialog doesn’t show up in the wrong place when your KCM scrolls a lot, like mine. 6.2.1

Tokodon #

Feature The welcome page when you first open Tokodon now looks much nicer and friendly. Hopefully it makes it clearer what Tokodon is, and also includes an even clearer badge to indicate what service it connects to. 24.12

The new welcome page.

Feature Display public servers to ease registration for first-time Mastodon users. Right now there’s not any filtering options, but this is a huge improvement over an empty textbox and expecting users to know where to find a server. 24.12

The new servers page.

Feature My post tag display improvement was merged, which limits tags to one line. Note that this isn’t the final design we’ll go with, but they will no longer spill onto multiple lines. 24.12

This is how tags will look when there’s too many to display at once.

Feature It seems people want Cohost’s “Following” feed for Mastodon, and of course Tokodon could do it! So that’s what I did, and implemented Cohost’s “Following” feed. Albiet it’s currently limited due to the Mastodon API we have available, so it comes with two big caveats currently: You only see when people were last active by the day, and the pagination kinda sucks. 24.12

The following feed.

Feature Added support for managing your social graph within Tokodon. For example if you don’t want someone to follow you anymore, or to quickly unfollow someone from your “Following” list. 24.12

Now you can force remove your followers. Don’t worry, I’m not removing you @patchexcempt!

Feature Self-identified bots are now correctly identified on the profile page. 24.12

The LWN Mastodon is now correctly marked as a bot.

Feature Due to limitations in the Mastodon API, we now put a button on the account page to denote there are more settings available online. 24.12

Where to find this link in the settings.

Feature Changed the media tab to a grid view, making it easy to see a user’s media all at once. This works different compared to Mastodon Web as you can even filter by featured tag in this mode - but it’s not shown in this screenshot. 24.12

Screenshot of the media tab on an artist’s account.

Feature Laid the initial groundwork unread notifications. You now have a number indicator in the sidebar for unread notifications, and mark them as read. 24.12

Feature Added list user management, so now you can use lists to their full advantage within Tokodon itself. 24.12

Time to categorize everything KDE-related into a nice list…

Feature The warning iconography for “Content Warnings” are now removed, and replaced with “Content Notice” to denote it’s true and more generic purpose. 24.12

How “content warnings” look now.

Feature Added support for read markers, allowing you to continue reading where you last left off. 24.12

Feature Now the authorship of links are displayed in link preview cards including a Mastodon account, if available. See this official Mastodon blog post for more details. 24.12

How authors appear in link preview cards now.

Feature Added a way to view poll results before voting, finally. 24.12

Finally, I can see it all!

Feature Now it’s possible to see which poll options you voted for. 24.12

Finally, I can remember it all!

Feature When clicking the “ALT” button, the media description pops up. This could be useful if you want to quickly view what the media is, before unhiding it. 24.12

Feature Tokodon now supports displaying admin report, severed relationship and moderation warning notifications. These notifications can then be configured in the notifications settings as per usual. The details shown in the notifications can still use a bit of work, though. 24.12

These are test notifications, since v4.3.0 is so new I haven’t seen them yet!

Feature The Notifications page is redesigned, to better suit non-English languages. I also added a button to go straight to Notification settings from here. 24.12

How the notifications page looks like, on a mobile device.

Feature When you’re using Tokodon on a newer and emptier Mastodon account, the application is much friendlier with more helpful explanatory text everywhere. 24.12

No posts in your Home? No bookmarks?

Feature Tokodon’s UI is now more responsive. The sidebar will appear on mobile devices if their screen is wide enough, like the Android tablet I use Tokodon on. 24.12

Feature Timeline streaming and read markers can be turned off, if you prefer. 24.12

The new timeline settings.

Feature When viewing someone’s profile, a list of people you follow that you have in common is now shown. Hopefully this will make it easier to find new friends on Mastodon! 24.12

Note that if you make your social graph private, you won’t show up here.

Feature You can now edit your profile fields within Tokodon, without having to do it through Mastodon Web. 24.12

YES!

Feature You can now see trending links (or “news”) on the Explore page, and also suggested users. I’m intentionally not showing a screenshot since it doesn’t look very good yet. 24.12

Bugfix The font size in the post composer now follows your preferred font setting. 24.12

Bugfix Tapping a post only works by tapping on the content itself, not the margins. 24.12

NeoChat #

Feature You can open location links in your preferred map application. This is the same Map application under the Applications KCM, so you can choose something like OpenStreetMap or even Marble. 24.12

Clicking this button will do it.

Feature The location chooser is now better in general. There’s a toolbar button to re-center the map, and if your device supports positioning then it can use that to center itself. 24.12

Can’t show it here on my desktop, yet.

Feature The security page is overhauled and now contains more relevant settings from other pages. 24.12

Hopefully NeoChat can make your experience on Matrix a more secure one.

Feature NeoChat’s welcome page when you first open it now looks a bit nicer. 24.12

More settings buttons, woo!

Bugfix Now when you only have friend invites and no messages a better icon is displayed, instead of none at all. 24.12

No longer blank!

Bugfix The buggy look of the date section header is finally fixed. 24.08.1

Itinerary #

Feature I added support for United Airlines reservations, so they can be imported to Itinerary and show up in KMail. Paired with Kalendar, this makes it really easy to keep track of my travel plans! I hope to add support for more North American airlines as I fly them, it’s surprisingly easy to write extractors. 24.08.1

How a United reservation shows up in KMail now, much more useful! Frameworks #

Feature Added support for separator actions in ToolBarLayout in Kirigami. 6.7

Feature Added command names for “Remove Spaces” and “Keep Extra Spaces” in KTextEditor, for a secret future project. 6.7

Feature You can now disable the scrollbar interactivity on ScrollablePages in Kirigami. 6.8

Feature Initial support for QML bindings to the KTextAddons emoticons API. This means that eventually our applications will no longer need to have their own special emoji picker, and our Unicode data will be unified! 1.6

Libraries #

Bugfix The caption text in applications that use the Kirigami add-ons fullscreen image viewer is now copyable. I usually write alternative text for my artwork in Tokodon first, and then copy it elsewhere. So it’s really cool to be able to do this within Tokodon itself and not have to go through Mastodon Web. 1.6

KDE Goals #

The goal I championed for, “We care about your Input” was selected! You can check it out on the goals page on the KDE website, which also includes links to our public workboard, chat and the original proposal. Let’s make KDE Plasma the perfect desktop environment for artists! (And everyone else too, I guess 😜)

Akademy #

I also attended Akademy this year! You can read more about it in it’s dedicated blog post if you missed it.

The fountain, again!

It’s been almost a year since I started this series, and I can’t believe I’ve done almost a dozen of these. People seem to really like them, and I’m really appreciative of that! Like I said in the beginning, there will most likely not be a next part as it will be rolled into someone else’s blog posts now.

If you want a hint as to what I’ll be about blogging next, you might want to remember where this all began.

My work in KDE for July 2024

My Work in KDE

Home

Dear community:

We’re excited to announce the IX International GNU Health Conference, that will take place in beautiful Sicily, Italy, at the University of Palermo this December 15th.

Mount Etna rising over suburbs of Catania, Sicily (Wikimedia)

The GNU Health Conference (GHCon) is the annual conference that brings together enthusiasts and developers of GNU Health, the Libre digital health ecosystem. The conference will have thematic sessions, lightning talks and implementation cases to get to know the GNU Health and other Free/Libre software communities from around the world.

We will show the upcoming features of the Health and Hospital Information System, standards, security, privacy, the GNU Health Federation and MyGNUHealth (the Personal Health Record).

GHCon2024 – The IX International GNU Health Conference

The XVII International Workshop on eHealth in Emerging Economies (IWEEE) is about Social Medicine and addressing the reality of the underprivileged around the world. There will be workshops to debate, and share experiences from humanitarian organizations and from those working in field of Social Medicine.

In the evening we will announce and honor the winners of the GNU Health Social Medicine awards.

We are counting on you to get the most out of the conference. Most importantly, we want you to have fun, feel at home, and enjoy being part
of the GNU Health community.

Looking forward to seeing you in Sicily!

Happy Hacking!

GHCon2024 homepage: https://www.gnuhealth.org/ghcon
Registration: https://my.gnusolidario.org/ghcon2024-registration/

Follow us in Mastodon (https://mastodon.social/@gnuhealth) for the latest news.

You can share the news using the tag #GHCon2024

It's simple and common to allocate a marker object to represent missing or null data.
MISSING = object() There's a slightly more verbose construct with some advantages:
import enum class MissingType(enum.Enum): MISSING = "MISSING" MISSING = MissingEnum.MISSING Type checkers understand that MISSING is the only possible value of MissingType; so you can use is checks:
def or_1(val: float | MissingType = MISSING) -> float: if scale is not MISSING: return 1.0 return scale mypy understands this is type correct.
More broadly, the semantics of a single-value enum are the same as a singleton. For example, neither singletons nor enums should have additional instances allocated. Instead of fixing bugs one by one with custom __init__ and __deepcopy__, the correct behaviors come for free.

The GNU Boot project previously found nonfree microcode in the first
RC1 release (in gnuboot-0.1-rc1_src.tar.xz to be exact).

This was announced in the "GNU Boot December 2023 News"
(https://lists.gnu.org/archive/html/gnuboot-announce/2023-12/msg00000.html). It
was fixed by re-making the affected tarball by hand with the nonfree
software removed and by contacting Canoeboot that had the same issue,
and by bug reporting and proposing patches to fix the issue in Guix as
well (they are still pending as we need to find a reviewer familiar
with Coreboot).

But recently we found a more problematic issue that also affects many
more distributions and all the previous GNU Boot release candidates.

The vboot source code used in Coreboot and in the vboot-utils package
available in many GNU/Linux distributions contains nonfree code in
their test data in tests/futility/data (nonfree microcode, nonfree
BIOS, nonfree Management Engine firmwares, etc).

So we had to re-release all the affected tarballs (like
gnuboot-0.1-rc1_src.tar.xz, gnuboot-0.1-rc2_src.tar.xz, etc).

We made and we improved the process along the way (we now store the
changes in tag inside our git repository and simply regenerate the
tarballs with the build system that is available for a given tag).

We are also in the process of contacting distributions and/or
coordinating with them and we also need help as there are many
distributions to contact.

To do that we started contacting the free GNU/Linux distros
(https://www.gnu.org/distros/free-distros.html) that ship the vboot
source code. We also contacted Replicant that is a free Android distro
that also ships vboot source code.

We also started to contact common distros that require certain
repositories to only have free software (so far we only contacted
Debian as that will help Trisquel fix the issue, but we also need to
contact Fedora for instance). Finding which distro to contact is made
much easier thanks to GNU's review of common distros policies
(https://www.gnu.org/distros/common-distros.html).

We coordinate that work on our bug report system at Savannah,
especially in the bug #66246
(https://savannah.gnu.org/bugs/index.php?66246).

I’m pretty interested in tablet stuff . Not because I think it makes senseo type long chunks of text using an on-screen keyboard, but they should make for a good drawing and painting experience. I’ve already written about the largest tablet I ever had, a 24″ Cintiq Pro and the Remarkable 2.

Today I’m going to run the gamut of the other tablets I’ve used…

Let’s start at eleven o’clock. That’s an iPad pro, first generation. I got it to see whether painting applications would work on it, and maybe port Krita to it. In the end, I pretty much only used it to read comics on. It’s top-heavy, the pen is top-heavy and I just didn’t like the painting applications I could get for it, like Procreate. I did create a little mock-up Qt-based painting application for testing purposes. But… I really, really hated the Apple Pencil. Like, really.  I also dislike iPadOS quite a bit.

Then, at two o’clock, the latest addition to the stable. The Remarkable Paper Pro. It’s bigger than the Remarkable 2, which isn’t necessarily a good thing. It’s supposedly the most advanced color e-ink panel there is, and there’s a front light. That makes it better than my Remarkable 2, which I now handed over to Irina, because without the front light, it’s unusable in anything but the brightest sunlight. That might just be my eyes, of course. The color, though… It’s fine for reading comics or pdf’s, if you like that seventies cheaply printed comic book look. Since the Remarkable runs its own OS, you cannot install Android apps, and since the OS changes quite a bit from version to version, third party apps ten not to work, or even brink the device, despite the device being remarkably open. (Sorry, pun intended.) The device does ooze quality, though! And the pen is great, really great.

Then, at four o’clock, there’s an Onyx Boox. It does run Android, and I wanted to see how well it would run Krita. Well, Krita runs, but the device is a bit slow. The pen is pretty nice, too, even if the cap is dinky. The color is worse than the remarkable’s one, but, again, if you’re reading counterfeit seventies Uncle Scrooge PDF’s, it’s fine. I mostly use this device to learn Hangul and read right-to-left manga. It’s too slow, and the display is too slow, for vertical scrolling manhwa.

Next, at six o’clock, the Samsung Tab S4 Android tablet that we got when we first ported Krita to Android. Despite being really old and not getting any OS updates anymore, it’s still doing fine. I mostly use it to read manga and manhwa using Nihom, and still for testing Krita. The pen is too small to be comfortable, but I only use it for testing. What’s really annoying is that every Saturday morning, I get a notification that Samsung’s legal stuff has changed — even though I don’t get any security updates.

Finally, at eight o’clock, the Frunsi Rubenstab. It’s a bit heavy, a bit small, a bit slow, but on the whole, it’s amazing. It runs Android. It’s mostly designed to be used in landscape mode. The pen is great, the display is good, the large bezels make it easy to hold and it comes with just about too much extra stuff, ranging from ant-static gloves to a brush-like implement.

 

Dear community:

We're excited to announce the IX International GNU Health Conference, that will take place in beautiful Sicily, Italy, at the University of Palermo this December 15th.

The GNU Health Conference (GHCon) is the annual conference that brings together enthusiasts and developers of GNU Health, the Libre digital health ecosystem. The conference will have thematic sessions, lightning talks and implementation cases to get to know the GNU Health and other Free/Libre software communites from around the world.

We will show the upcoming features of the Health and Hospital Information System, standards, security, privacy, the GNU Health Federation and MyGNUHealth (the Personal Health Record)

The XVII International Workshop on eHealth in Emerging Economies (IWEEE) is about Social Medicine and addressing the reality of the underprivileged around the world. There will be workshops to debate, and share experiences from humanitarian organizations and from those working in field of Social Medicine.

In the evening we will announce and honor the winners of the GNU Health Social Medicine awards.

We are counting on you to get the most out of the conference. Most importantly, we want you to have fun, feel at home, and enjoy being part of the GNU Health community!
Happy Hacking!

Homepage: https://www.gnuhealth.org/ghcon

Registration: https://my.gnusolidario.org/ghcon2024-registration/

Follow us in Mastodon (https://mastodon.social/@gnuhealth) for the latest news.

Happy hacking!

You can share the news using the tag #GHCon2024

At this point we’ve addressed most of the nasty regressions people found in Plasma 6.2. Thankfully most were not widespread, and were instead related to people’s diverse hardware setups. Most seem to have had smooth upgrades, but those whose hardware setups misbehaved with changes made in 6.2 were a focus for rapid response. These kinds of hardware-specific issues are really difficult to test for ahead of time, which is why we’re always asking for more beta testers! For folks whose hardware encountered problems, I expect things to be pretty good with Plasma 6.2.2, which’ll be released in a few days.

In the meantime, the floodgates have been opened for those not working on bug fixes to start landing their feature work for Plasma 6.3! Check it all out below:

Notable New Features

It’s now possible to customize the pressure curve for drawing tablet pens! (Joshua Goins, Plasma 6.3.0. Link):

Added a new page to Info Center that shows technical data extracted from your screens’ EDID blocks (Harald Sitter, Plasma 6.3.0. Link)

In Plasma’s Weather Report widget, added support for nighttime forecasts when using a weather station from the Deutscher Wetterdienst source (Wolfgang Müller, Plasma 6.3.0. Link)

Notable UI Improvements

If you manage to mess up your tablet calibration badly enough that it becomes impossible to use it to re-calibrate, System Settings’ drawing Tablet page will now reset the calibration when you click the “Default” button (Joshua Goins, Plasma 6.2.1. Link)

Plasma’s digital Clock widget now displays all events on days with more than five events, making it actually useful for that use case (Tino Lorenz, Plasma 6.3.0. Link)

Improved the way pop-ups using the “Sliding Popups” effect slide out of floating Plasma panels (Niccolò Venerandi, Plasma 6.3.0. Link):

https://i.imgur.com/9313Iz7.mp4

Plasma’s Power and Battery widget now shows better placeholder text when you’re managing power using tlp instead of power-profiles-daemon, or when power-profiles-daemon is installed but not supported by the device’s firmware (Natalie Clarius, Plasma 6.3.0. Link)

It’s no longer possible to accidentally resize a Plasma widget’s pop-up from one of its edges that touches the edge of a screen or Plasma panel (Niccolò Venerandi, Plasma 6.3.0. Link)

The upload and download arrows in Plasma’s Networks widget now uses a different character that’s substantially more readable with many fonts (Tem PQD, Plasma 6.3.0. Link)

Notable Bug Fixes

Fixed a regression that could sometimes cause graphical corruption on external screens attached to certain NVIDIA GPUs (Xaver Hugl, Plasma 6.2.1. Link 1 and link 2)

Fixed a regression that caused Kickoff to unexpectedly open after you hold down the Shift key and press Alt, which may seem like it’s an unusual thing to do, but it can be common in certain video games and it’s quite disruptive in that context (Yifan Zhu, Plasma 6.2.1. Link)

Fixed a case where System Settings’ Wallpaper page could crash when previously configured in a way that’s now invalid (Fushan Wen, Plasma 6.2.1. Link)

Fixed a case where the tablet calibration overlay could appear on a monitor where it doesn’t make any sense (Joshua Goins, Plasma 6.2.1. Link)

Fixed three regressions accidentally introduced in Plasma 6.2.1 while fixing other bugs: one causing crashes on multi-GPU systems, the second making the splash screen take too long, and the final one making the cursor not change shape properly when hovering over links in certain apps (Xaver Hugl and David Edmundson, Plasma 6.2.1.1. Link 1, link 2, and link 2)

Fixed a performance regression affecting people using NVIDIA GPUs and the Night Light feature (Xaver Hugl, Plasma 6.2.1.1. Link)

Fixed a regression that caused HDR to stop working properly in games that request absurd brightness levels, like a billion nits of brightness (Xaver Hugl, Plasma 6.2.2. Link)

Fixed a regression that could cause the cursor to misbehave in certain video games (Xaver Hugl, Plasma 6.2.2. Link)

Fixed an issue that caused visual distortion in the clipboard widget’s config window when interacting with it in a very specific way (David Edmundson, Plasma 6.2.2. Link)

Fixed two visual issues in Breeze’s GTK 4 theming (Łukasz Patron, Plasma 6.3.0. Link 1 and link 2)

Fixed a minor issue with widgets on the Plasma desktop that would cause the cursor to inappropriately use the hand shape after dragging them and then later hovering over an edge (Niccolò Venerandi, Plasma 6.3.0. Link)

Some third-party apps handle files in a buggy way, and overwrite your file associations such that certain file types get configured to always open with the kde-open or xdg-open command-line tools. When they do this, the system no longer consumes all CPU and memory resources and crashes; instead opening the file simply doesn’t work (Akseli Lahtinen, Frameworks 6.8. Link)

Opening a “Get New [stuff]” dialog on any System Settings pages no longer sometimes causes the app to secretly stay open after you close it, which would prevent it from being re-opened again and make you want to throw the computer out the window (Harald Sitter, Frameworks 6.8. Link)

Category icons in Kickoff are now symbolic as intended when using the Breeze Dark icon theme. Also put in place some other changes to prevent this happening again in the future (David Redondo, Frameworks 6.8. Link 1 and link 2)

Other bug information of note:

• 4 Very high priority Plasma bug (up from 2 last week). Current list of bugs
• 33 15-minute Plasma bugs (down from 35 last week). Current list of bugs
• 143 KDE bugs of all kinds fixed over the last week. Full list of bugs

Performance & Technical

Refined the tablet calibration feature so that it produces more accurate calibrations (Joshua Goins, Plasma 6.2.1. Link)

How You Can Help

If you’re a developer, keep on working to fix Plasma 6.2 regressions! We’ve got ’em on the run, and this is our chance to finish them off!

Otherwise, visit https://community.kde.org/Get_Involved to discover additional ways to be part of a project that really matters. Each contributor makes a huge difference in KDE; you are not a number or a cog in a machine! You don’t have to already be a programmer, either. I wasn’t when I got started. Try it, you’ll like it! We don’t bite! Or consider donating instead! That helps too.

Life begins. An empty page. A hollow echo on an barren stage. We wander through the quiet air, Unsure of what awaits us there. With work and study, I filled the days, But purpose wanes in fading haze. An emptiness remained inside, A restless longing I tried to hide. But then a hand, warm in the night, Turns the dark to softest light. Two souls meet and pledge their vow, To fill what life is missing now. By chance, our paths became entwined, Through joy and laughter, lives combined. Soon tiny hands, starry-eyed, Fill our home with love and pride. With every laugh, with every tear, You fill the space, bring kindness near. Two hearts become one place, Of love and hope, a shared embrace. My gratitude grows deep and wide, For every moment, side by side. Through joy, sorrow, pain, persistence, You bring meaning to my existence.

KUnifiedPush provides push notifications for KDE applications. Push notifications are a mechanism to support applications that occasionally need to receive some kind of information from their server-side part, and where receiving in a timely manner matters. Chat applications or weather and emergency alerts would be examples for that. More technical details about KUnifiedPush are available on Volker's introduction post about KUnifiedPush.

KUnifiedPush provides three possible provider backends for push notifications:

• Ntfy
• Nextpush
• Gotify

The default provider of KUnifiedPush is Ntfy with unifiedpush.kde.org but you can change it to your own server in the System Settings.

Currently both NeoChat and Tokodon integrates with KUnifiedPush as both Matrix and Mastodon support UnifiedPush. There is also ongoing work for weather and emergency alerts.

Packager Section

You can find the package on download.kde.org and it has been signed with Carl Schwan's GPG key.

This is the release schedule the release team agreed on

https://community.kde.org/Schedules/KDE_Gear_24.12_Schedule

Dependency freeze is in around 3 weeks (November 7) and feature freeze one
after that. Get your stuff ready!

I'm excited to share an experiment I've been working on: a solar-powered, self-hosted website running on a Raspberry Pi. The website at https://solar.dri.es is powered entirely by a solar panel and battery on our roof deck in Boston.

My solar panel and Raspberry Pi Zero 2 are set up on our rooftop deck for testing. Once it works, it will be mounted properly and permanently.

By visiting https://solar.dri.es, you can dive into all the technical details and lessons learned – from hardware setup to networking configuration and custom monitoring.

As the content on this solar-powered site is likely to evolve or might even disappear over time, I've included the full article below (with minor edits) to ensure that this information is preserved.

Finally, you can view the real-time status of my solar setup on my solar panel dashboard, hosted on my main website. This dashboard stays online even when my solar-powered setup goes offline.

Background

For over two decades, I've been deeply involved in web development. I've worked on everything from simple websites to building and managing some of the internet's largest websites. I've helped create a hosting business that uses thousands of EC2 instances, handling billions of page views every month. This platform includes the latest technology: cloud-native architecture, Kubernetes orchestration, auto-scaling, smart traffic routing, geographic failover, self-healing, and more.

This project is the complete opposite. It's a hobby project focused on sustainable, solar-powered self-hosting. The goal is to use the smallest, most energy-efficient setup possible, even if it means the website goes offline sometimes. Yes, this site may go down on cloudy or cold days. But don't worry! When the sun comes out, the website will be back up, powered by sunshine.

My primary website, https://dri.es, is reliably hosted on Acquia, and I'm very happy with it. However, if this solar-powered setup proves stable and efficient, I might consider moving some content to solar hosting. For instance, I could keep the most important pages on traditional hosting while transferring less essential content – like my 10,000 photos – to a solar-powered server.

Why am I doing this?

This project is driven by my curiosity about making websites and web hosting more environmentally friendly, even on a small scale. It's also a chance to explore a local-first approach: to show that hosting a personal website on your own internet connection at home can often be enough for small sites. This aligns with my commitment to both the Open Web and the IndieWeb.

At its heart, this project is about learning and contributing to a conversation on a greener, local-first future for the web. Inspired by solar-powered sites like LowTech Magazine, I hope to spark similar ideas in others. If this experiment inspires even one person in the web community to rethink hosting and sustainability, I'll consider it a success.

Solar panel and battery

The heart of my solar setup is a 50-watt panel from Voltaic, which captures solar energy and delivers 12-volt output. I store the excess power in an 18 amp-hour Lithium Iron Phosphate (LFP or LiFePO4) battery, also from Voltaic.

A solar panel being tested on the floor in our laundry room. Upon connecting it, it started charging a battery right away. It feels truly magical. Of course, it won't stay in the laundry room forever so stay tuned for more ...

I'll never forget the first time I plugged in the solar panel – it felt like pure magic. Seeing the battery spring to life, powered entirely by sunlight, was an exhilarating moment that is hard to put into words. And yes, all this electrifying excitement happened right in our laundry room.

A 18Ah LFP battery from Voltaic, featuring a waterproof design and integrated MPPT charge controller. The battery is large and heavy, weighing 3kg (6.6lbs), but it can power a Raspberry Pi for days.

Voltaic's battery system includes a built-in charge controller with Maximum Power Point Tracking (MPPT) technology, which regulates the solar panel's output to optimize battery charging. In addition, the MPPT controller protects the battery from overcharging, extreme temperatures, and short circuits.

A key feature of the charge controller is its ability to stop charging when temperatures fall below 0°C (32°F). This preserves battery health, as charging in freezing conditions can damage the battery cells. As I'll discuss in the Next steps section, this safeguard complicates year-round operation in Boston's harsh winters. I'll likely need a battery that can charge in colder temperatures.

The 12V to 5V voltage converter used to convert the 12V output from the solar panel to 5V for the Raspberry Pi.

I also encountered a voltage mismatch between the 12-volt solar panel output and the Raspberry Pi's 5-volt input requirement. Fortunately, this problem had a more straightforward solution. I solved this using a buck converter to step down the voltage. While this conversion introduces some energy loss, it allows me to use a more powerful solar panel.

Raspberry Pi models

This website is currently hosted on a Raspberry Pi Zero 2 W. The main reason for choosing the Raspberry Pi Zero 2 W is its energy efficiency. Consuming just 0.4 watts at idle and up to 1.3 watts under load, it can run on my battery for about a week. This decision is supported by a mathematical uptime model, detailed in Appendix 1.

That said, the Raspberry Pi Zero 2 W has limitations. Despite its quad-core 1 GHz processor and 512 MB of RAM, it may still struggle with handling heavier website traffic. For this reason, I also considered the Raspberry Pi 4. With its 1.5 GHz quad-core ARM processor and 4 GB of RAM, the Raspberry Pi 4 can handle more traffic. However, this added performance comes at a cost: the Pi 4 consumes roughly five times the power of the Zero 2 W. As shown in Appendix 2, my 50W solar panel and 18Ah battery setup are likely insufficient to power the Raspberry Pi 4 through Boston's winter.

With a single-page website now live on https://solar.dri.es, I'm actively monitoring the real-world performance and uptime of a solar-powered Raspberry Pi Zero 2 W. For now, I'm using the lightest setup that I have available and will upgrade only when needed.

Networking

The Raspberry Pi's built-in Wi-Fi is perfect for our outdoor setup. It wirelessly connects to our home network, so no extra wiring was needed.

I want to call out that my router and Wi-Fi network are not solar-powered; they rely on my existing network setup and conventional power sources. So while the web server itself runs on solar power, other parts of the delivery chain still depend on traditional energy.

Running this website on my home internet connection also means that if my ISP or networking equipment goes down, so does the website – there is no failover in place.

For security reasons, I isolated the Raspberry Pi in its own Virtual Local Area Network (VLAN). This ensures that even if the Pi is compromised, the rest of our home network remains protected.

To make the solar-powered website accessible from the internet, I configured port forwarding on our router. This directs incoming web traffic on port 80 (HTTP) and port 443 (HTTPS) to the Raspberry Pi, enabling external access to the site.

One small challenge was the dynamic nature of our IP address. ISPs typically do not assign fixed IP addresses, meaning our IP address changes from time to time. To keep the website accessible despite these IP address changes, I wrote a small script that looks up our public IP address and updates the DNS record for solar.dri.es on Cloudflare. This script runs every 10 minutes via a cron job.

I use Cloudflare's DNS proxy, which handles DNS and offers basic DDoS protection. However, I do not use Cloudflare's caching or CDN features, as that would somewhat defeat the purpose of running this website on solar power and keeping it local-first.

The Raspberry Pi uses Caddy as its web server, which automatically obtains SSL certificates from Let's Encrypt. This setup ensures secure, encrypted HTTP connections to the website.

Monitoring and dashboard The Raspberry Pi 4 (on the left) can run a website, while the RS485 CAN HAT (on the right) will communicate with the charge controller for the solar panel and battery.

One key feature that influenced my decision to go with the Voltaic battery is its RS485 interface for the charge controller. This allowed me to add an RS485 CAN HAT (Hardware Attached on Top) to the Raspberry Pi, enabling communication with the charge controller using the Modbus protocol. In turn, this enabled me to programmatically gather real-time data on the solar panel's output and battery's status.

I collect data such as battery capacity, power output, temperature, uptime, and more. I send this data to my main website via a web service API, where it's displayed on a dashboard. This setup ensures that key information remains accessible, even if the Raspberry Pi goes offline.

My main website runs on Drupal. The dashboard is powered by a custom module I developed. This module adds a web service endpoint to handle authentication, validate incoming JSON data, and store it in a MariaDB database table. Using the historical data stored in MariaDB, the module generates Scalable Vector Graphics (SVGs) for the dashboard graphs. For more details, check out my post on building a temperature and humidity monitor, which explains a similar setup in much more detail. Sure, I could have used a tool like Grafana, but sometimes building it yourself is part of the fun.

A Raspberry Pi 4 with an attached RS485 CAN HAT module is being installed in a waterproof enclosure.

For more details on the charge controller and some of the issues I've observed, please refer to Appendix 3.

Energy use, cost savings, and environmental impact

When I started this solar-powered website project, I wasn't trying to revolutionize sustainable computing or drastically cut my electricity bill. I was driven by curiosity, a desire to have fun, and a hope that my journey might inspire others to explore local-first or solar-powered hosting.

That said, let's break down the energy consumption and cost savings to get a better sense of the project's impact.

The tiny Raspberry Pi Zero 2 W at the heart of this project uses just 1 Watt on average. This translates to 0.024 kWh daily (1W * 24h / 1000 = 0.024 kWh) and approximately 9 kWh annually (0.024 kWh * 365 days = 8.76 kWh). The cost savings? Looking at our last electricity bill, we pay an average of $0.325 per kWh in Boston. This means the savings amount to $2.85 USD per year (8.76 kWh * $0.325/kWh = $2.85). Not exactly something to write home about.

The environmental impact is similarly modest. Saving 9 kWh per year reduces CO2 emissions by roughly 4 kg, which is about the same as driving 16 kilometers (10 miles) by car.

There are two ways to interpret these numbers. The pessimist might say that the impact of my solar setup is negligible, and they wouldn't be wrong. Offsetting the energy use of a Raspberry Pi Zero 2, which only draws 1 Watt, will never be game-changing. The $2.85 USD saved annually won't come close to covering the cost of the solar panel and battery. In terms of efficiency, this setup isn't a win.

But the optimist in me sees it differently. When you compare my solar-powered setup to traditional website hosting, a more compelling case emerges. Using a low-power Raspberry Pi to host a basic website, rather than large servers in energy-hungry data centers, can greatly cut down on both expenses and environmental impact. Consider this: a Raspberry Pi Zero 2 W costs just $15 USD, and I can power it with main power for only $0.50 USD a month. In contrast, traditional hosting might cost around $20 USD a month. Viewed this way, my setup is both more sustainable and economical, showing some merit.

Lastly, it's also important to remember that solar power isn't just about saving money or cutting emissions. In remote areas without grid access or during disaster relief, solar can be the only way to keep communication systems running. In a crisis, a small solar setup could make the difference between isolation and staying connected to essential information and support.

Why do so many websites need to stay up?

The reason the energy savings from my solar-powered setup won't offset the equipment costs is that the system is intentionally oversized to keep the website running during extended low-light periods. Once the battery reaches full capacity, any excess energy goes to waste. That is unfortunate as that surplus could be used, and using it would help offset more of the hardware costs.

This inefficiency isn't unique to solar setups – it highlights a bigger issue in web hosting: over-provisioning. The web hosting world is full of mostly idle hardware. Web hosting providers often allocate more resources than necessary to ensure high uptime or failover, and this comes at an environmental cost.

One way to make web hosting more eco-friendly is by allowing non-essential websites to experience more downtime, reducing the need to power as much hardware. Of course, many websites are critical and need to stay up 24/7 – my own work with Acquia is dedicated to ensuring essential sites do just that. But for non-critical websites, allowing some downtime could go a long way in conserving energy.

It may seem unconventional, but I believe it's worth considering: many websites, mine included, aren't mission-critical. The world won't end if they occasionally go offline. That is why I like the idea of hosting my 10,000 photos on a solar-powered Raspberry Pi.

And maybe that is the real takeaway from this experiment so far: to question why our websites and hosting solutions have become so resource-intensive and why we're so focused on keeping non-essential websites from going down. Do we really need 99.9% uptime for personal websites? I don't think so.

Perhaps the best way to make the web more sustainable is to accept more downtime for those websites that aren't critical. By embracing occasional downtime and intentionally under-provisioning non-essential websites, we can make the web a greener, more efficient place. The solar panel and battery mounted on our roof deck. Next steps

As I continue this experiment, my biggest challenge is the battery's inability to charge in freezing temperatures. As explained, the battery's charge controller includes a safety feature that prevents charging when the temperature drops below freezing. While the Raspberry Pi Zero 2 W can run on my fully charged battery for about six days, this won't be sufficient for Boston winters, where temperatures often remain below freezing for longer.

With winter approaching, I need a solution to charge my battery in extreme cold. Several options to consider include:

1. Adding a battery heating system that uses excess energy during peak sunlight hours.
2. Applying insulation, though this alone may not suffice since the battery generates minimal heat.
3. Replacing the battery with one that charges at temperatures as low as -20°C (-4°F), such as Lithium Titanate (LTO) or certain AGM lead-acid batteries. However, it's not as simple as swapping it out – my current battery has a built-in charge controller, so I'd likely need to add an external charge controller, which would require rewiring the solar panel and updating my monitoring code.

Each solution has trade-offs in cost, safety, and complexity. I'll need to research the different options carefully to ensure safety and reliability.

The last quarter of the year is filled with travel and other commitments, so I may not have time to implement a fix before freezing temperatures hit. With some luck, the current setup might make it through winter. I'll keep monitoring performance and uptime – and, as mentioned, a bit of downtime is acceptable and even part of the fun! That said, the website may go offline for a few weeks and restart after the harshest part of winter. Meanwhile, I can focus on other aspects of the project.

For example, I plan to expand this single-page site into one with hundreds or even thousands of pages. Here are a few things I'd like to explore:

1. Testing Drupal on a Raspberry Pi Zero 2 W: As the founder and project lead of Drupal, my main website runs on Drupal. I'm curious to see if Drupal can actually run on a Raspberry Pi Zero 2 W. The answer might be "probably not", but I'm eager to try.
2. Upgrading to a Raspberry Pi 4 or 5: I'd like to experiment with upgrading to a Raspberry Pi 4 or 5, as I know it could run Drupal. As noted in Appendix 2, this might push the limits of my solar panel and battery. There are some optimization options to explore though, like disabling CPU cores, lowering the RAM clock speed, and dynamically adjusting features based on sunlight and battery levels.
3. Creating a static version of my site: I'm interested in experimenting with a static version of https://dri.es. A static site doesn't require PHP or MySQL, which would likely reduce resource demands and make it easier to run on a Raspberry Pi Zero 2 W. However, dynamic features like my solar dashboard depend on PHP and MySQL, so I'd potentially need alternative solutions for those. Tools like Tome and QuantCDN offer ways to generate static versions of Drupal sites, but I've never tested these myself. Although I prefer keeping my site dynamic, creating a static version also aligns with my interests in digital preservation and archiving, offering me a chance to delve deeper into these concepts.

Either way, it looks like I'll have some fun ahead. I can explore these ideas from my office while the Raspberry Pi Zero 2 W continues running on the roof deck. I'm open to suggestions and happy to share notes with others interested in similar projects. If you'd like to stay updated on my progress, you can sign up to receive new posts by email or subscribe via RSS. Feel free to email me at dries@buytaert.net. Your ideas, input, and curiosity are always welcome.

Appendix Appendix 1: Sizing a solar panel and battery for a Raspberry Pi Zero 2 W

To keep the Raspberry Pi Zero 2 W running in various weather conditions, we need to estimate the ideal solar panel and battery size. We'll base this on factors like power consumption, available sunlight, and desired uptime.

The Raspberry Pi Zero 2 W is very energy-efficient, consuming only 0.4W at idle and up to 1.3W under load. For simplicity, we'll assume an average power consumption of 1W, which totals 24Wh per day (1W * 24 hours).

We also need to account for energy losses due to inefficiencies in the solar panel, charge controller, battery, and inverter. Assuming a total loss of 30%, our estimated daily energy requirement is 24Wh / 0.7 ≈ 34.3Wh.

In Boston, peak sunlight varies throughout the year, averaging 5-6 hours per day in summer (June-August) and only 2-3 hours per day in winter (December-February). Peak sunlight refers to the strongest, most direct sunlight hours. Basing the design on peak sunlight hours rather than total daylight hours provides a margin of safety.

To produce 34.3Wh in the winter, with only 2 hours of peak sunlight, the solar panel should generate about 17.15W (34.3Wh / 2 hours ≈ 17.15W). As mentioned, my current setup includes a 50W solar panel, which provides well above the estimated 17.15W requirement.

Now, let's look at battery sizing. As explained, I have an 18Ah battery, which provides about 216Wh of capacity (18Ah * 12V = 216Wh). If there were no sunlight at all, this battery could power the Raspberry Pi Zero 2 W for roughly 6 days (216Wh / 34.3Wh per day ≈ 6.3 days), ensuring continuous operation even on snowy winter days.

These estimates suggest that I could halve both my 50W solar panel and 18Ah battery to a 25W panel and a 9Ah battery, and still meet the Raspberry Pi Zero 2 W's power needs during Boston winters. However, I chose the 50W panel and larger battery for flexibility, in case I need to upgrade to a more powerful board with higher energy requirements.

Appendix 2: Sizing a solar panel and battery for a Raspberry Pi 4

If I need to switch to a Raspberry Pi 4 to handle increased website traffic, the power requirements will rise significantly. The Raspberry Pi 4 consumes around 3.4W at idle and up to 7.6W under load. For estimation purposes, I'll assume an average consumption of 4.5W, which totals 108Wh per day (4.5W * 24 hours = 108Wh).

Factoring in a 30% loss due to system inefficiencies, the adjusted daily energy requirement increases to approximately 154.3Wh (108Wh / 0.7 ≈ 154.3Wh). To meet this demand during winter, with only 2 hours of peak sunlight, the solar panel would need to produce about 77.15W (154.3Wh / 2 hours ≈ 77.15W).

While some margin of safety is built into my calculations, this likely means my current 50W solar panel and 216Wh battery are insufficient to power a Raspberry Pi 4 during a Boston winter.

For example, with an average power draw of 4.5W, the Raspberry Pi 4 requires 108Wh daily. In winter, if the solar panel generates only 70 to 105Wh per day, there would be a shortfall of 3 to 38Wh each day, which the battery would need to cover. And with no sunlight at all, a fully charged 216Wh battery would keep the system running for about 2 days (216Wh / 108Wh per day ≈ 2 days) before depleting.

To ensure reliable operation, a 100W solar panel, capable of generating enough power with just 2 hours of winter sunlight, paired with a 35Ah battery providing 420Wh, could be better. This setup, roughly double my current capacity, would offer sufficient backup to keep the Raspberry Pi 4 running for 3-4 days without sunlight.

Appendix 3: Observations on the Lumiax charge controller

As I mentioned earlier, my battery has a built-in charge controller. The brand of the controller is Lumiax, and I can access its data programmatically. While the controller excels at managing charging, its metering capabilities feel less robust. Here are a few observations:

1. I reviewed the charge controller's manual to clarify how it defines and measures different currents, but the information provided was insufficient.
   • The charge controller allows monitoring of the "solar current" (register 12367). I expected this to measure the current flowing from the solar panel to the charge controller, but it actually measures the current flowing from the charge controller to the battery. In other words, it tracks the "useful current" – the current from the solar panel used to charge the battery or power the load. The problem with this is that when the battery is fully charged, the controller reduces the current from the solar panel to prevent overcharging, even though the panel could produce more. As a result, I can't accurately measure the maximum power output of the solar panel. For example, in full sunlight with a fully charged battery, the calculated power output could be as low as 2W, even though the solar panel is capable of producing 50W.
   • The controller also reports the "battery current" (register 12359), which appears to represent the current flowing from the battery to the Raspberry Pi. I believe this to be the case because the "battery current" turns negative at night, indicating discharge.
   • Additionally, the controller reports the "load current" (register 12362), which, in my case, consistently reads zero. This is odd because my Raspberry Pi Zero 2 typically draws between 0.1-0.3A. Even with a Raspberry Pi 4, drawing between 0.6-1.3A, the controller still reports 0A. This could be a bug or suggest that the charge controller lacks sufficient accuracy.
2. When the battery discharges and the low voltage protection activates, it shuts down the Raspberry Pi as expected. However, if there isn't enough sunlight to recharge the battery within a certain timeframe, the Raspberry Pi does not automatically reboot. Instead, I must perform a manual 'factory reset' of the charge controller. This involves connecting my laptop to the controller – a cumbersome process that requires me to disconnect the Raspberry Pi, open its waterproof enclosure, detach the RS485 hat wires, connect them to a USB-to-RS485 adapter for my laptop, and run a custom Python script. Afterward, I have to reverse the entire process. This procedure can't be performed while traveling as it requires physical access.
3. The charge controller has two temperature sensors: one for the environment and one for the controller itself. However, the controller's temperature readings often seem inaccurate. For example, while the environment temperature might correctly register at 24°C, the controller could display a reading as low as 14°C. This seems questionable though there might be an explanation that I'm overlooking.
4. The battery's charge and discharge patterns are non-linear, meaning the charge level may drop rapidly at first, then stay steady for hours. For example, I've seen it drop from 100% to 65% within an hour but remain at 65% for over six hours. This is common for LFP batteries due to their voltage characteristics. Some advanced charge controllers use look-up tables, algorithms, or coulomb counting to more accurately predict the state of charge based on the battery type and usage patterns. The Lumiax doesn't support this, but I might be able to implement coulomb counting myself by tracking the current flow to improve charge level estimates.

Appendix 4: When size matters (but it's best not to mention it)

When buying a solar panel, sometimes it's easier to beg for forgiveness than to ask for permission.

One day, I casually mentioned to my wife, "Oh, by the way, I bought something. It will arrive in a few days."

"What did you buy?", she asked, eyebrow raised.

"A solar panel", I said, trying to sound casual.

"A what?!", she asked again, her voice rising.

Don't worry!", I reassured her. "It's not that big", I said, gesturing with my hands to show a panel about the size of a laptop.

She looked skeptical but didn't push further.

Fast forward to delivery day. As I unboxed it, her eyes widened in surprise. The panel was easily four or five times larger than what I'd shown her. Oops.

The takeaway? Sometimes a little underestimation goes a long way.

When a new major version of Drupal is released, custom code often requires updates to align with API changes, including the removal of deprecated APIs.

Because I keep forgetting certain aspects of this workflow, I decided to document it for future reference.

Tools overview Tool Interface Functionality Target Audience Upgrade Status module UI in Drupal Identifies deprecated code, hosting environment compatibility, and more Site administrators and developers Drupal Check Command-line Identifies deprecated code Developers, especially during coding and continuous integration (CI) Upgrade Status module

The Upgrade Status module assesses a Drupal site's readiness for major version upgrades by checking for deprecated code and other compatibility issues.

Screenshot of a Drupal upgrade status report showing hosting environment compatibility checks.

1. Install the Upgrade Status module like you would install any other Drupal module:

   [code bash]$ ddev composer require –dev drupal/upgrade_status[/code]

   Here, ddev is the tool I prefer for managing my local development environment. composer is a dependency manager for PHP, commonly used to install Drupal modules. The –dev option specifies that the module should be installed as a development requirement, meaning it is necessary for development environments but not installed on production environments.

2. Enable the Upgrade Status module:

   [code bash]$ ddev drush pm-enable upgrade_status[/code]

   drush stands for "Drupal shell" and is a command-line utility for managing Drupal sites. The command pm:enable (where pm stands for "package manager") is used to enable a module in Drupal.

3. After enabling the module, you can access its features by navigating to the Admin > Reports > Upgrade status page at /admin/reports/upgrade-status.

Upgrading PHP and MySQL using DDEV

The Upgrade Status module might recommend updating PHP and MySQL, per Drupal's system requirements.

To update the PHP version of DDEV, use the following command:

[code bash]$ ddev config –-php-version 8.3[/code]

To upgrade the MySQL version of DDEV and migrate your database content, use the following command:

[code bash]$ ddev debug migrate-database mariadb:10.11[/code]

After updating these settings, I restart DDEV and run my PHPUnit tests. Although these tests are integrated into my CI/CD workflow, I also run them locally on my development machine using DDEV for immediate feedback.

Drupal Check

Drupal Check is a command-line tool that scans Drupal projects for deprecated code and compatibility issues.

I always run drupal-check before updating my Drupal site's code and third-party dependencies. This helps ensure there are no compatibility issues with the current codebase before upgrading. I also run drupal-check after the update to identify any new issues introduced by the updated code.

Output of Drupal Check command indicating no deprecated code was found.

1. Installation:

   [code bash]$ ddev composer require –dev mglaman/drupal-check[/code]

2. Run Drupal Check from the root of your Drupal installation:

   [code bash]$ ./vendor/bin/drupal-check –-memory-limit 500M docroot/modules/custom[/code]

   I usually have to increase the memory limit, hence the --memory-limit 500M.

Using PHPStan directly

In the future, I'd like to evaluate whether using PHPStan directly is simpler. This is a TODO for myself. Drupal Check is essentially a wrapper around PHPStan, offering default configuration such as automatically running at level 2. To achieve the same result with PHPStan, I should be able to simply run:

[code bash]$ php vendor/bin/phpstan analyze -l 2 docroot/modules/custom[/code]

In a rapidly evolving digital landscape, organizations need robust solutions to align marketing strategies with overarching business objectives.

For the first time, Drupal 11.1 will natively support OOP hooks! Dating back to the very early years of Drupal, hooks provide powerful ways to modify processing flows, forms, data structures and many other parts of the system. Read more at https://www.drupal.org/node/3442349

Update 1

Great news, everyone! We now have all the necessary components to start creating our 16px icon collection. I believe that we can work on the design and creation of these icons simultaneously.

Here are some general guidelines to consider when designing the 16px icons:

• Our objective is to correlate the designs from the 24px collection to the 16px as closely as possible.
• When in doubt, create an icon that resembles or simplifies the 24px shape.
• Use 1px lines for the icons.
• Utilize the IconGrid16 component to guide your design.
• Once the icon is complete, change the icon color to the “ColorScheme-Text” color.
• To export the icon, use the Icon Jetpack plugin.

I am excited to begin working on this project and would be grateful for any designer assistance that is available. If you need help learning Figma, please don’t hesitate to reach out, and we will gladly provide our support.

If you require edit access to the Figma file for the 16px icon collection, please let me know. I believe that collaboration and teamwork will lead to the creation of an amazing set of 16px icons.

Update 2

Additionally, I wanted to let you all know that I have made some edits to the color scheme of the graphic. I would appreciate any feedback you may have on the changes, and whether I might have missed anything. Let’s work together to create a cohesive and visually stunning icon collection!

Once our colors are aligned to what we need in the system, we will update the issue recently created for this purpose. This issue is under heavy development and things are changing rapidly. Read with caution and expect updates.

https://invent.kde.org/teams/vdg/issues/-/issues/82

Colors in the design system have changed. I need to correlate the colors to the color labels below. It will look a little off for some time. However, the color variables in Figma are updated to the latest feedback. Just this graphic needs the updates as well. Only the color box is correct, not the color names

Update 3

This week we took previously-created Ocean window shadows created by Manuel de la Fuente and integrated them in the design system. The shadow variables in Figma now use Ocean-inspired shadow levels to make them more visible. This is to address feedback on shadows previously being too faint. Hopefully these make a difference.

For some reason that I don't know, the XL shadow looks fainter than the LG shadow, but it seems to be a visual bug in Figma. If you apply the XL shadow, it should appear correctly in your graphics. Update 4

Transition to PenPot is on hold for now until we have the community instance created and path manipulation updates are applied. This would impede us from recreating icons the same way we have them right now.

The typical post-DrupalCon slow week — from travel woes to taking some time off, to passing on learnings to the rest of the team. But there’s still some interesting things to note this week :)

The funny bug fixed with one line of HTML

During DrupalCon, Chris “cosmicdreams” Weber spotted a funny edge case we somehow hadn’t triggered during development: after placing a component using Experience Builder (XB), using the component props form to specify values and pressing Enter, no it actually submits the form, because that’s what forms do! But in this case, it is not meant to be submitted: the preview is updated live and saving will (eventually) happen automatically.

I investigated, and discovered the existence of <form method="dialog">, which turns out to be perfect for this use case! 1

Thanks to Chris in particular for not just reporting this, but also persevering in fixing this, including writing his very first end-to-end Cypress test! Along the way, half the team contributed either in-person at DrupalCon (Ben “bnjmnm” Mullins and Bálint “balintbrews” Kléri) or remotely (Jesse “jessebaker” Baker, Utkarsh “utkarsh_33”, Deepak “deepakkm” Mishra and I).

The bug fixed with CSS instead of JS and even net-deleting CSS

When placing components and causing the height to change, the UI became jumpy — not good.

Gaurav “gauravvvv” started working on a fix, and in reviewing it, Jesse thought of a different approach altogether … the result: a +8,-53 diffstat that deleted a bunch of JS (one entire file even) and replaced it with a pure CSS solution (fit-content) — even one CSS line less than before!

Research mode: continued

I mentioned last week that a bunch of us were in research mode.

Ted “tedbow” Bowman and Travis “traviscarden” Carden continued research on #3475672: auto-saving, drafts, and all possible ways to achieve that — with Travis overhauling that issue summary in such a magnificently structured way that has rarely been seen on drupal.org. It really helps streamline the discussion!

Similarly, Harumi “hooroomoo” Jang, Xinran “xinran” Cao, and  Alex “effulgentsia” Bronstein continued iterating on #3475363: in-UI (JS) component creation Proof-of-Concept using StackBlitz — stay tuned for a demo! :D

Missed a prior week? See all posts tagged Experience Builder.

Goal: make it possible to follow high-level progress by reading ~5 minutes/week. I hope this empowers more people to contribute when their unique skills can best be put to use!

For more detail, join the #experience-builder Slack channel. Check out the pinned items at the top!

Assorted clean-up & bugfixes

• Deepak lifted all methods out of SdcController2 into separate invokable services-as-controllers, which turned a single massive file into much more easily digestible pieces — and he was able to remove some former controller methods that had lost their usages.
• Shyam “shyam_bhatt” Bhatt, Omkar “omkar-pd” Deshpande and Jesse fixed the zoom buttons behaving erratically.
• … and a bunch more small bugs that are less interesting :)

Week 21 was September 30–October 6, 2024.

1. I love that after all these years there’s still more to discover in the HTML spec, and more affordances are available that others have thoughtfully constructed that I’ve never before needed! ↩︎

2. Originally named just fine, but definitely in need of a rename to prepare for #3454519: [META] Support component types other than SDC! ↩︎

• Drupal
• Acquia
• Experience Builder

Let’s go for my web review for the week 2024-42.

You Can’t Make Friends With The Rockstars

Tags: tech, capitalism, marketing, politics, criticism

People have to realize that tycoons like the ones from big tech companies can both be rich and mediocre. They were smart enough to seize opportunities at the right time but they are not exceptional. In fact, they’re even boring and spineless.

The best quote in this paper I think is: “There is nothing special about Elon Musk, Sam Altman, or Mark Zuckerberg. Accepting that requires you to also accept that the world itself is not one that rewards the remarkable, or the brilliant, or the truly incredible, but those who are able to take advantage of opportunities, which in turn leads to the horrible truth that those who often have the most opportunities are some of the most boring and privileged people alive.”

The real problem is that lots of journalists can’t come to term with the fairy tale and so fall prey to all their publicity stunts as if it had any hidden meaning. This is dangerous because of all the political power they try to seize for their own gains.

Meanwhile, “the most powerful companies enjoy a level of impunity, with their founders asked only the most superficial, softball of questions — and deflecting anything tougher by throwing out dead cats when the situation demands.”

Now you can go and read this long piece.

https://www.wheresyoured.at/rockstars/

What’s With All the Trumpy VCs?

Tags: tech, politics

It’s actually unsurprising, all those tech and crypto bros have assets in jeopardy if some regulation is applied to their industry. No wonder they’d support the one with the most libertarian agenda after the current administration which did look into antitrust cases and increased regulation (even though marginally).

https://www.theatlantic.com/technology/archive/2024/10/silicon-valley-venture-capitalists-trump/680225/

Employees Describe an Environment of Paranoia and Fear Inside Automattic Over WordPress Chaos

Tags: tech, blog, wordpress

Wow, the atmosphere looks fairly toxic at Automattic right now. It felt like it was just about the trademark dispute but clearly the craziness is running much deeper. This is concerning for WordPress future I think.

https://www.404media.co/automattic-buyout-offer-wordpress-matt-mullenweg/

You should be using an RSS reader

Tags: tech, social-media, rss

Want to put an end to the social media platforms weight on our lives? For once there’s an individual solution which might work. This is a chance because as he rightfully points out individual solutions are generally too complicated to bring systemic change. Here this is actually doable.

https://pluralistic.net/2024/10/16/keep-it-really-simple-stupid/#read-receipts-are-you-kidding-me-seriously-fuck-that-noise

Using Cloudflare on your website could be blocking RSS users

Tags: tech, cloudflare, rss

Cloudflare indeed needs to do better to accommodate RSS readers. They’re not malicious bots and shouldn’t be flagged as such.

https://openrss.org/blog/using-cloudflare-on-your-website-could-be-blocking-rss-users

Stop using Brave Browser

Tags: tech, web, browser, google, privacy, politics

A good reminder that this is not the Google Chrome alternative you’re looking for. It’s the same privacy invading mindset with some bigotry on top.

https://www.spacebar.news/stop-using-brave-browser/

The Internet Archive and its 916 billion saved web pages are back online

Tags: tech, web, archive, security

It’s a very important project, it’s really concerning that this attack went through. The service is still partly disrupted but they’re showing signs of recovery. Let’s wish them luck and good health. This archival service is essential for knowledge and history preservation on the web.

https://arstechnica.com/tech-policy/2024/10/the-internet-archive-and-its-916-billion-saved-webpages-are-back-online/

Large language models reduce public knowledge sharing on online Q&A platforms

Tags: tech, ai, machine-learning, gpt, knowledge, criticism, research

Now the impact seems clear and this is mostly bad news. This reduces the production of public knowledge so everyone looses. Ironically it also means less public knowledge available to train new models. At some point their only venue to fine tune their models will be user profiling which will be private… I’ve a hard time seeing how we won’t end up stuck with another surveillance apparatus providing access to models running on outdated knowledge. This will lock so many behaviors and decisions in place.

https://academic.oup.com/pnasnexus/article/3/9/pgae400/7754871#483096365

LLMs don’t do formal reasoning - and that is a HUGE problem

Tags: tech, ai, machine-learning, neural-networks, gpt, logic, mathematics, research

Of course I recommend reading the actual research paper. This article is a good summary of the consequences though. LLMs definitely can’t be trusted with formal reasoning including basic maths. This is a flaw in the way they are built, the bath forward is likely merging symbolic and sub-symbolic approaches.

https://garymarcus.substack.com/p/llms-dont-do-formal-reasoning-and

Should you use uv’s managed Python in production?

Tags: tech, python, security, supply-chain, developer-experience

It’s tempting to use uv. It’s probably fine on the developer workstation at this point. It looks a bit early to use it in production though, it’s a bit young for that and carries questions regarding supply chain security still.

https://pythonspeed.com/articles/uv-python-production/

Use an External GPU on Raspberry Pi 5 for 4K Gaming

Tags: tech, raspberry-pi, gpu, gaming

Definitely a funny hack. Not usable for compute workloads though.

https://www.jeffgeerling.com/blog/2024/use-external-gpu-on-raspberry-pi-5-4k-gaming

Master Embedded Development with Rust and no_std

Tags: tech, rust, embedded

Nice article showing the steps to port Rust code to run on deeply embedded systems. It highlights the difficulties and caveats of such a task.

https://towardsdatascience.com/nine-rules-for-running-rust-on-embedded-systems-b0c247ee877e

Table lookups are efficient

Tags: tech, programming, optimization

This is too often overlooked, but table lookups can help with performance if done well.

https://lemire.me/blog/2024/10/14/table-lookups-are-efficient/

Graphics Tricks from Boomers

Tags: tech, graphics, 2d, hardware

Nice graphic tricks when the hardware was harder to work with. It’s amazing how much we could fit back then out of sheer motivation.

https://arnaud-carre.github.io/2024-09-08-4ktribute/

Why is everybody talking about sync engines?

Tags: tech, web, collaborative, crdt

Excellent introduction to sync engines and how they work. The concept is indeed coming from the gaming industry and we see it more in web applications nowadays due to the user demands for working offline and real time collaboration.

https://fika.bar/blogs/paoramen/why-is-everybody-talking-about-syncing-engines-01JAAEZTCMZA28DSESAJR3J30J

Can Logic Programming Be Liberated from Predicates and Backtracking?

Tags: tech, programming, logic, ai, prolog

Finally a path forward for logic programming? An opportunity to evolve beyond Prolog and its variants? Good food for thought.

https://www-ps.informatik.uni-kiel.de/~mh/papers/WLP24.pdf

Be Suspicious of Success

Tags: tech, reliability, tests, debugging

This is an important trait to have for a developer. If you’re content of things working without knowing why and how they work, you’re looking for a world of pain later.

https://buttondown.com/hillelwayne/archive/be-suspicious-of-success/

Boring Tech Is Stifling Improvement

Tags: tech, architecture, complexity, developer-experience, vendor-lockin

I tend to side on the “boring tech” side, but indeed this is a good reminder that what we want is finding the right balance.

https://yonkeltron.com/posts/boring-tech-is-stifling-improvement/

Cognitive load is what matters

Tags: tech, complexity, cognition, design, architecture

Definitely this. Our cognitive capacity is limited, we’d better not deplete it due to complexity before we even reach the core of the problem at hand.

https://minds.md/zakirullin/cognitive#full

Why make software?

Tags: tech, philosophy

Our craft is based on shifting sands. This brings interesting philosophical questions, like why do it at all? I think the answer proposed in this short article is spot on. It can help bring new ideas on how to be in the world. This is more important than the code itself.

https://sean.voisen.org/blog/why-make-software

Germany’s 49-euro ticket resulted in significant modal shift from road to rail

Tags: train, ecology, politics

This is definitely a good idea, I wish we had the same in France. This is too bad that they plan to raise the price, it’s going to limit the impact of the measure.

https://www.mcc-berlin.net/en/news/information/information-detail/article/49-euro-ticket-resulted-in-significant-modal-shift-from-road-to-rail.html

Bye for now!

How does a Python tool support all types of DataFrames and their various features? Could a lightweight library be used to add compatibility for newer formats like Polars or PyArrow? This week on the show, we speak with Marco Gorelli about his project, Narwhals.

[ Improve Your Python With 🐍 Python Tricks 💌 – Get a short & sweet Python Trick delivered to your inbox every couple of days. >> Click here to learn more and see examples ]