Feeds

In the next release of Dolphin, the search backend (when Baloo indexing is disabled) will be faster and support more file types, by using external projects ripgrep-all and ripgrep to do the search. Merge Request

What are ripgrep and ripgrep-all?

ripgrep is a fast text search tool that uses various optimizations including multi-threading (compared to grep and Dolphin's internal search backend which are single-threaded).

ripgrep-all, quote its homepage, is "ripgrep, but also search in PDFs, E-Books, Office documents, zip, tar.gz, etc.".

How to enable it

Install the ripgrep-all package from your distribution's package manager (which should also install ripgrep). Then Dolphin will automatically use it for content search, when Baloo is disabled.

If your distribution doesn't provide ripgrep-all, you can also try installing ripgrep. Then Dolphin will use it for content search, but without the additional file type support.

Limitations

• It only works in content search mode, and when Baloo content indexing is disabled. File name search still uses the internal backend.

• It only works in local directories. When searching in remote directories (e.g. Samba, ssh), the internal search backend is used. Although we can run ripgrep in remote directories through the kio-fuse plugin, testing shows it can be 3 times slower than the internal backend, so it's not used.

• It doesn't work on Windows. Although both ripgrep and ripgrep-all have releases for Windows, I personally don't have Windows experience to integrate them. Merge request to enable it on Windows is welcome.

Customization

You can change the command line with which Dolphin calls the external tools. Copy /usr/share/kio_filenamesearch/kio-filenamesearch-grep to ~/.local/share/kio_filenamesearch/, and modify the script there. The script contains comments on the calling convention between Dolphin and it, and explanations on the command line options.

One option you might want to remove is -j2. It limits the number of threads ripgrep (and ripgrep-all) uses to 2. Using more threads can make the search much slower in hard disks (HDD). I tried to detect HDD automatically, but it's not reliable, so I went with a conservative default. It's still faster than the internal backend, but if you have an SSD, you can remove the option to unlock the full speed of ripgrep.

You can also use a different external tool. (E.g. the silver search (ag). Or a full-text search engine other than Baloo) Just make sure it outputs paths separated by NUL. Usually a -0 option will do that.

More customization

You can even modify the script so that you can specify different external tools in the search string. For example, you can insert the following code before the original code that calls ripgrep-all:

...(line 1-33) --run) if test "$2" = "@git"; then exec sh -c 'git status -s -z|cut -c 4- -z' fi ...

Then if you search for "@git" in a git directory, it will show you changed files.

Future works

There are quite a lot to improve in Dolphin's search (when not using Baloo). The content search should also search in file names. The search string is currently interpreted as a regular expression, but a fuzzy match or shell globbing seems to be a more sensible default (probably with regexp as an option). Hopefully future works will address these issues.

As a Top-rated Drupal Development Company, attending DrupalCon Barcelona for the first time exceeded all of our expectations. The energy of the event was incredible, and it gave us the opportunity to connect with so many people in person. One of the standout moments was the inspiring StarShot initiative, whose marketing strategy makes a compelling case for businesses to consider Drupal as a solution.

Starshot / Drupal CMS Product Strategy

NO CODE website building, built on top of Drupal core itself. So, it will be easily able to beat the other no-code solutions like WIX, SQUARESPACE, and Shopify while still being able to maintain its open-source nature where you still will be able to have full control to customize and override things on your own.

Join Tania Allard, PSF Board Member, and Łukasz Langa, CPython Developer-in-Residence, for ‘Python 3.13 and the Latest Trends: A Developer’s Guide to 2025’, a live stream event hosted by Paul Everitt from JetBrains. Thank to JetBrains for partnering with us on the Python Developers Survey and this event to highlight the current state of Python!

The session will take place tomorrow, October 3, at 5:00 pm CEST (11:00 am EDT). Tania and Łukasz will be discussing the exciting new features in Python 3.13, plans for Python 3.15 and current Python trends gathered from the 2023 Annual Developers Survey. Don't miss this chance to hear directly from the experts behind Python’s development!

Watch the live stream event on YouTube

Don’t forget to enable YouTube notifications for the stream and mark your calendar.

I have adopted uv for a lot of Python development. I'm also a heavy user of direnv, which I like as a tool for setting up project-specific environments.

Much like Hynek describes, I've found uv sync to be fast enough to put into the chdir path for new directories. Here's how I'm doing it.

Direnv Libraries

First, it turns out you can pretty easily define custom direnv functions like the built-in ones (layout python, etc...). You do this by adding functions to ~/.config/direnv/direnvrc or in ~/.config/direnv/lib/ as shell scripts. I use this extensively to make my .envrc files easier to maintain and smaller. Now that I'm using uv here is my default for python:

function use_standard-python() { source_up_if_exists dotenv_if_exists source_env_if_exists .envrc.local use venv uv sync } What does that even mean?

Let me explain each of these commands and why they are there:

• source_up_if_exists -- this direnv stdlib function is here because I often group my projects into directories with common configuration. For example, when working on Chicon 8, I had a top level .envrc that set up the AWS configuration to support deploying Wellington and the Chicon 8 website. This searches up til it finds a .envrc in a higher directory, and uses that. source_up is the noisier, less-adaptable sibling.

• dotenv_if_exists -- this loads .env from the current working directory. 12-factor apps often have environment-driven configuration, and docker compose uses them relatively seamlessly as well. Doing this makes it easier to run commands from my shell that behave like my development environment.

• source_env_if_exists .envrc.local -- sometimes you need more complex functionality in a project than just environment variables. Having this here lets me use .envrc.local for that. This comes after .env because sometimes you want to change those values.

• use venv -- this is a function that activates the project .venv (creating it if needed); I'm old and set in my ways, and I prefer . .venv/bin/activate.fish in my shell to the more newfangled "prefix it with a runner" mode.

• uv sync -- this is a super fast, "install my development and main dependencies" command. This was way, way too slow with pip, pip-tools, poetry, pdm, or hatch, but with uv, I don't mind having this in my .envrc

Using it in a sentence

With this set up in direnv's configuration, all I need in my .envrc file is this:

use standard-python

I've been using this pattern for a while now; it lets me upgrade how I do default Python setups, with project specific settings, easily.

With PyCharm, you now have the support of AI Assistant at your fingertips. You can interact with it right where you do most of your work – in the editor. 

Stuck with an error in your code? Need to add documentation or tests? Just start typing your request on a new line in the editor, just as if you were typing in the AI Assistant chat window. PyCharm will automatically recognize your natural language request and generate a response.  

PyCharm leaves a purple mark in the gutter next to lines changed by AI Assistant so you can easily see what has been updated. 

If you don’t like the initial suggestion, you can generate a new one by pressing Tab. You can also adjust the initial input by clicking on the purple block in the gutter or simply pressing Ctrl+/ or ⌘/.

Want to get assistance with a specific argument? You can narrow the context that AI Assistant uses for its response as much as you want. Just put the caret in the relevant context, type the $ or ? symbol, and start writing. PyCharm will recognize your prompt and take the current context into account for its suggestions. 

The new inline AI assistance works for Python, JavaScript, TypeScript, JSON, and YAML file formats, while the option to narrow the context works only for Python so far.

This feature is available to all AI Assistant subscribers in the second PyCharm 2024.3 EAP build. You can get a free trial version of AI Assistant straight in the IDE: to enable AI Assistant, open a project in PyCharm, click the AI icon on the right-hand toolbar, and follow the instructions that appear.

Download PyCharm 2024.3 EAP

Cédric Krier has found that python-sql does not escape non-Expression for unary operators (like And and Or) which makes any system exposing those vulnerable to an SQL injection attack.

Impact

CVSS v3.0 Base Score: 9.1

• Attack Vector: Network
• Attack Complexity: Low
• Privileges Required: Low
• User Interaction: None
• Scope: Changed
• Confidentiality: High
• Integrity: Low
• Availability: Low

Workaround

There is no known workaround.

Resolution

All affected users should upgrade python-sql to the latest version.

Affected versions: <= 1.5.1
Non affected versions: >= 1.5.2

Reference

• Unary operators does not escape non-Expression (#93) · Issues · Tryton / python-sql · GitLab

Concerns?

Any security concerns should be reported on the bug-tracker at https://bugs.tryton.org/python-sql with the confidential checkbox checked.

2 posts - 2 participants

Read full topic

Microblogging v1.3.0 for Pelican released! Posts should now sort as expected. Thanks @ashwinvis. on PyPI #Microblogging #Pelican Plugins #Releases #Python

This being my first post on the KDE sphere (or any other sphere), it was supposed to be just a touch of contact with the world of blogging. But since time pass by in a blast, let's just summarize how I lived my third one in-person Akademy 2024.

Würzbug. Back to Germany

This year's Akademy happily got me back to Germany, which has become like a second home and a place I like to visit at least once a year (yeah, I missed the Dürüms).

I had bought the D-Ticket, which allowed my to board any public transport immaginable (well, except for ICE trains, but I haven't heard much good about them either) for bare 49€. It brought me some memories back as a student in Dresden, enjoying the same perks with the Semesterticket, just on a regional scope. Thanks to Itinerary and its route planner I was able to make it to Würzburg even an hour earlier than anticipated (less 20min train delay which I've heard it's currently quite a good metric).

After having my hotel booking cancelled last minute due to needed repair works, I had booked an appartment because the hotel prices were a bit over the top. I was really lucky to find that just around the corner I had a bus stop to go to the venue, and also Andy Betts and Richard Wagner as ilustrious neighbors. And one of the best rated Dönner places in the city. Very lucky indeed!

The Talks

It's hard to make a better summary of the Talks days that our very own Promo Team's report, which I agree with on many points.

What I particulary felt on these Akademy's talks was a high focus into the future. Some words were thematically present along most of the talks: story, product, and impact.

The story we as the KDE community want to tell is not just a bunch of code packages that live in an ethereal world to be grabbed by a few enthusiasts or distros, but a full useful product for the end users, an inviting environment for fellow developers, and a reliable asset for manufactures on their very concrete hardware.

There were many reveals and surprises to achieve this goal. Projects that had been incubating for some time, were now made public on this Akademy: the KDE OS Codename Banana by Harald Sitter, the Next Project and design system by Andy Betts and the Union theme engine by Arjen Hiemstra.

Some talks addressed the social and environmental impact of the technology we create. The one that specially got to me was the small story Nicole Teal told at her lightning talk. How a group of kids gave many "older" PCs a new life installing KDE, while learning new skills and making community, felt really true and a spur to continue contributing to FOSS. It really matters.

From the technical talks, I enjoyed "What is color, anyway" by Xaver Hugl, and unfortunately had to miss some other ones (Python and Rust integration with Qt). This is the hardest part, where you cannot just .clone() yourself and attend to two talks at the same time. Maybe I would have learnt to do that if I had attended the Rust presentation? (yeah, sorry bad Rust dad joke)

It was also on Sunday when Aniqa and Carl took me by surprise to agains my will happily answer to a small video interview. Just joking, it was fun. Just preemptively preparing myself for when the final video comes out and I can see what words I did babble :D.

The BoFs

After a very intense weekend of talks and the social event and post-event on Sunday, I took the Monday's morning off to have some rest. In the evening, Andy and Manuel showed me a bit more about the design system they're using and the icon exporter Manuel has been developing to streamline the process between designers and the final product. Amazing stuff!

I also started a draft of this very blog post, which wasn't much successful as you can imagine by its final release date.

The big BoF day for me was mostly Tuesday, where I focussed on the Plasma and the VDG ones, though I missed those on KWin's roadmap and window tiling, due to competing schedules. During the Plasma BoF, we could experiment in real time, the step-by-step process of realeasing the Plasma 6.1.5 version, thanks to Jonathan, our Plasma release manager.

Finally, on Thursday I got to enjoy the brand new Sticker BoF. Besides me not having any stickers on my own to share, and being mostly minimalistic when it comes to decoration, I had a great time and ended up sticking my laptop up and about, including an very limited unit of the Sticker BoF's sticker. Thanks Kieryn for organizing it. Of course, Carl won the sticker's award 😄.

On a more personal level, I regret a bit not having participated more on some of the BOFs. Most of my KDE's contributions this summer have been improvements on very niche aspects: the Weather widget and the tool to preview keyboard layouts (tastenbrett), so I felt a bit "out of the loop" on the more general and pressing matters in Plasma.

The Socials

Where the Akademy really shines is in putting together some hundreds of amazing people with some common interests, that in the end happen to make the best software products and computing ecosystem out there.

It is a real warp of space and time. On the Welcome Event I got to meet Eva Brucherseifer, one of the attendants and founders of the very first Akademys, and also recent joiners to the community I only knew via chat or MR interactions.

When the Biergarten that was booked for the Sunday Social Event did cancel due to a storm warning, I could immediately check two things:

• that the Weather Widget did correctly report the Warnung vor starkem Gewitter
• and that the local organizing team went the extra mile to make the Akademy a success, even against the elements. Beer, pizzas and good people was all required to have an enjoyable evening.

Finally I was really happy to meet again with friends from the previous Akademys and the Plasma Sprint in 2023, sharing opinions on widespread topics, suchs as immovable OSes, ingenuous ways to open a beer bottle, keyboard input methods, or the torture and punishment customs of German cities in medieval times.

Thanks to the organizing team, the speakers, the attendants, the patrons and the whole KDE Community which made possible yet another amazing Akademy!

We’ve just completed an extensive overhaul of our frontend tooling, with Vite and Storybook at the centre. Let’s go over it piece by piece.

by jack.taranto / 2 October 2024

The goal of the overhaul was to modernise all aspects of the build stack, remove legacy dependencies and optimise development processes.

Tooling is split into four pieces: asset building, styleguide, linting and testing.

Asset building for Drupal with Vite

We have always utilised two separate tools to build CSS and JS assets. Until now, this was PostCSS and Rollup, in the past Sass and Webpack have been in the mix. 

With Vite it’s one tool to build both types of assets. To introduce Vite to anyone not already familiar with it, I would say it’s a super fast version of Rollup without the configuration headaches. 

Moving to Vite sped up our development build times and production build times (in CI), simplified our config files and removed a huge number of NPM dependencies.

Vite library mode

A typical Vite build pipeline is most suitable for single-page apps. It involves an index.html file where Vite dynamically adds CSS and JS assets. However, with Drupal, we do not have an index.html file; we have the Drupal libraries system to load assets, with which Vite has no way of communicating.

Luckily, Vite ships with something called Library mode, which is seemingly tailor-made for Drupal assets! Library mode allows us to output all our frontend assets to a single directory, where we can include them in a libraries.yml file or via a Pinto Theme Object.

To use our config, you’ll first need a few dependencies. 

npm i -D vite postcss-preset-env tinyglobby browserslist-to-esbuild

Our vite.config.js looks like this:

import { defineConfig } from 'vite' import { resolve } from 'path' import { globSync } from 'tinyglobby' import browserslist from 'browserslist-to-esbuild' import postcssPresetEnv from 'postcss-preset-env' const entry = globSync(['**/*.entry.js', '**/*.css'], { ignore: [   '**/_*.css',   'node_modules',   'vendor',   'web/sites',   'web/core',   'web/libraries',   '**/contrib',   'web/storybook', ], }) export default defineConfig(({ mode }) => ({ build: {   lib: {     entry,     formats: ['es'],   },   target: browserslist(),   cssCodeSplit: true,   outDir: resolve(import.meta.dirname, './web/libraries/library-name'),   sourcemap: mode === 'development', }, css: {   postcss: {     plugins: [       postcssPresetEnv(),     ],     map: mode === 'development',   }, }, }))

We define entry points as any *.css file and any *.entry.js file. We exclude certain directories, so we aren’t building assets that are included with core or contrib. Additionally, we exclude CSS partials, which use an underscore prefix. This allows us to add asset source files anywhere in our project. They could be added in the theme, a module, or (as we have been doing recently) inside a /components directory in the project root.

The Vite config itself enables library mode using build.lib, passing all source assets through using build.lib.entry and building JS assets using the es format.

build.cssCodeSplit is required when passing CSS files through to build.lib.entry.

build.outDir specifies a folder inside the Drupal libraries directory where all built assets will be sent. Drupal libraries.yml definitions are then updated to include files from this directory.

build.sourcemap will output JS sourcemaps in development mode only.

Finally, we pass through any PostCSS plugins with css.postcss.plugins. Vite includes postcss-import by default, so you do not need to add that. It will also handle resolving to custom directories without including resolve options for postcss-import, meaning you’ll only need to add your specific plugins. In this case, we reduced ours to just postcss-preset-env. Add more as needed!

We also enable CSS sourcemaps with css.postcss.map.

This config allowed us to completely remove the PostCSS config file, PostCSS CLI, Rollup, its config and all Rollup plugins.

The config file above is a starting point—a minimum viable setup you’ll need to build assets using Vite’s library mode. Add to it as you need to, and familiarise yourself with Vite’s documentation.

Using Browerslist with Vite

Vite uses ESBuild to determine the output feature set based on the build.target. For many years now, we have used Browserslist to determine feature sets for both PostCSS and Rollup, and it works really well. We weren’t ready to lose this functionality by moving to Vite.

This is where the browserslist-to-esbuild dependency comes in. We added the following .browserlistrc file to our project root:

> 1% in AU

By calling browserslist() in build.target we get our browser feature set provided by Browserslist instead of ESBuild.

NPM scripts for development mode and production builds

We use NPM scripts for consistent usage of non-standard commands both locally and on CI for production builds.

"scripts": { "dev-vite": "vite build -w -m development", "build-vite": "vite build" },

To watch and build source assets whilst developing locally, we use npm run dev-vite. Unlike Vite’s dev command, this still uses Rollup under the hood (instead of ESBuild), so we miss out on the extreme speed of Vite’s dev mode. However, it’s still very fast—faster than default Rollup. It’s a tradeoff that provides what we need, which is building our assets while we are editing them in a way that works with Drupal. We lose hot reloading, but that’s less important when we have Storybook at our disposal.

Production builds happen on CI using npm run build-vite.

Using Storybook with Drupal

Although we had been using Storybook in our projects for some time now, we hadn’t yet standardised on it or provided a default setup. And with Vite now baked into Storybook, it seemed like an excellent time to provide this.

If you have a spare 15 minutes, I would first suggest checking out Lee Rowland’s lightning talk from Drupal South to see just how fluid a frontend development experience Storybook brings to Drupal.

Storybook is easy to setup using its wizard with:

npx storybook@latest init

It will present you with a few choices. Just make sure you choose HTML and Vite for your project type. When using Vite with Storybook, Storybook provides its necessary config to Vite; however, it will still read your projects vite.config.js file for any additional config. This includes the PostCSS config we setup above and any additional functionality you provide.

Now, install Lee’s Twig plugin. This plugin will allow us to write components using Twig that can be imported into our stories.js files. First, install the plugin:

npm i -D vite-plugin-twig-drupal

Then register the plugin by adding the following lines to the vite.config.js default export:

plugins: [ twig(), ],

See the vite-plugin-twig-drupal documentation for more details, including how to set up Twig namespaces.

Writing stories

To use Twig in Storybook, it’s quite similar to any other framework. Here’s an example story of a card component:

import Component from './card.html.twig' const meta = { component: Component, args: {   title: `<a href="#">Card title</a>`,   description:     'Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam eu turpis molestie, dictum est a, mattis tellus. Sed dignissim, metus nec fringilla accumsan, risus sem sollicitudin lacus.', }, } export default meta export const Card = {}

We import the twig file as Component and then add that to the stories meta. We can pass through args, which will show up in the Twig file as variables, and we can use HTML here.

Writing stories is covered in more detail in our front-end nirvana blog post.

NPM scripts for developing with Vite and Storybook at once

Our standard development practice involves building and testing components in Storybook and then integrating them with Drupal using Pinto. To do this, we need to run Storybook and our Vite tooling at once so we have both Storybook dev mode and our built frontend assets available to us.

Running two NPM scripts in parallel can be a pain, so we have implemented concurrently to streamline this approach.

npm i -D concurrently

Then we use the following in our NPM scripts:

{ "scripts": {   "dev": "concurrently -k -n \"VITE,STORYBOOK\" -c \"#636cff,#ff4785\" \"npm run dev-vite\" \"npm run dev-storybook\"",   "build": "concurrently -n \"VITE,STORYBOOK\" -c \"#636cff,#ff4785\" \"npm run build-vite\" \"npm run build-storybook\"",   "dev-storybook": "storybook dev -p 6006 --no-open",   "build-storybook": "storybook build -o web/storybook",   "dev-vite": "vite build -w -m development",   "build-vite": "vite build" },

With npm run dev we get coloured output so we can see which tool is running and what it’s doing. npm run build is used on CI.

Linting with Prettier, Stylelint and ESLint

These three tools have been a staple on our projects for a long time, but with ESLint introducing a new flat configuration method, it seemed like a good time to review the tooling.

First, we’ll need some more dependencies.

npm i -D prettier stylelint stylelint-config-standard eslint@8.57.0 @eslint/js@8.57.0 eslint-config-prettier eslint-config-drupalFormatting source assets with Prettier

We are using Prettier to format both CSS and JS files. With PHPStorm, you can set this to happen on file save. We also have an NPM script to do this on demand and before committing. NPM commands are at the end of this section.

Reducing Stylelint configuration

Past iterations of our Stylelint tooling involved extensive configuration on each project. Using Stylelints latest standard configuration, it sets sensible defaults, which lets us remove most config options. We’re left with the following:

const config = { extends: ['stylelint-config-standard'], rules: {   'custom-property-empty-line-before': null,   'no-descending-specificity': null,   'import-notation': 'string',   'selector-class-pattern': [     '^([a-z])([a-z0-9]+)(-[a-z0-9]+)?(((--)?(__)?)([a-z0-9]+)(-[a-z0-9]+)?)?$',     {       message:         'Expected class selector to be BEM selector matching either .block__element or .block--modifier',     },   ],   'selector-nested-pattern': '^&', }, } export default config

We added a custom rule to ensure project BEM selectors are used.

Like prettier, we also use a .stylelintignore file to exclude core and contrib folders.

Moving to ESLint flat config

The new config format isn’t yet supported by all plugins (there’s a compatibility tool to help with this), but where it is, it’s much simpler.

The following config can be used in conjunction with Prettier.

import js from '@eslint/js' import globals from 'globals' import prettier from 'eslint-config-prettier' import drupal from 'eslint-config-drupal' export default [ js.configs.recommended, prettier, {   languageOptions: {     globals: {       ...globals.browser,       ...globals.node,       ...drupal.globals,       dataLayer: true,       google: true,       once: true,     },   }, }, {   rules: {     'no-console': 'error',     'no-unused-expressions': [       'error',       {         allowShortCircuit: true,         allowTernary: true,       },     ],     'consistent-return': 'warn',     'no-unused-vars': 'off',   }, }, {   ignores: [     'node_modules',     'vendor',     'bin',     'web/core',     'web/sites',     'web/modules/contrib',     'web/themes/contrib',     'web/profiles/contrib',     'web/libraries',     'web/storybook',   ], }, ]

This includes linting for Storybook files and tests as well. Additionally, it ignores core and contrib files.

NPM scripts for linting

We use the following NPM scripts to run our linting commands locally and on CI.

"scripts": { "format": "prettier --write \"**/*.{css,ts,tsx,js,jsx,json}\"", "lint": "npm run lint-prettier && npm run lint-css && npm run lint-js", "lint-prettier": "prettier --check \"**/*.{css,ts,tsx,js,jsx,json}\"", "lint-css": "stylelint \"**/*.css\"", "lint-js": "eslint ." },

These commands work so well because we have excluded all Drupal core and contrib folders using ignore files. 

Testing using Storybook test runner

Storybook test runner provides the boilerplate-free ability to run automated snapshot and accessibility tests on each story in Storybook. Our previous test tooling involved using Jest and Axe to handle this, but we needed to manually write tests for each component. With Storybook test runner, this is handled automatically.

To set it up, first, install some dependencies.

npm i -D @storybook/test-runner axe-playwright

Then create the following test-runner.js file inside your .storybook directory.

import { waitForPageReady } from '@storybook/test-runner' import { injectAxe, checkA11y } from 'axe-playwright' import { expect } from '@storybook/test'; /* * See https://storybook.js.org/docss/writing-tests/test-runner#test-hook-api * to learn more about the test-runner hooks API. */ const config = { async preVisit(page) {   await injectAxe(page) }, async postVisit(page) {   await waitForPageReady(page)   // Automated snapshot testing for each story.   const elementHandler = await page.$('#storybook-root')   const innerHTML = await elementHandler.innerHTML()   expect(innerHTML).toMatchSnapshot()   // Automated accessibility testing for each story.   await checkA11y(page, '#storybook-root', {     detailedReport: true,     detailedReportOptions: {       html: true,     },   }) }, } export default config

This config will loop through all your stories, wait for them to be ready, then snapshot them and run Axe against them. You’ll get great output from the command, so you can see exactly what’s going on.

NPM scripts for testing Storybook locally and on CI

First, install a few more dependencies:

npm i -D http-server wait-on

The following scripts will run the complete Storybook test base and update snapshots as needed.

"scripts": { "test-storybook": "test-storybook", "test-storybook:update": "test-storybook -u", "test-storybook:ci": "concurrently -k -s first -n \"SERVER,TEST\" -c \"magenta,blue\" \"npm run http-server\" \"wait-on tcp:6006 && npm run test-storybook\"", "http-server": "http-server web/storybook -p 6006 --silent" },

To run tests on CI we use http-server to serve the built version of Storybook and wait-on to delay the test run until the server is ready. The concurrently command smooths the output of both these commands.

Wrapping up

See the complete workflow, including all config and ignore files in the pnx-frontend-build-tools-blog repository I've setup for this post.

The repository and this blog post have been designed to provide the necessary pieces so you can implement this workflow on your existing (or new) projects. However, a lot more functionality can be gained, including easily adding support for Typescript, React and Vitest.

Tagged Storybook, Vite

Kraft (Github) is the desktop app making it easy to create offers and invoices quickly and beautifully in small companies. It is targetted to the free desktop and runs on Linux.

This is the release announcement of the new Kraft version 1.2.2. This is a small service release that fixes a few bugs and CI issues.

Right after this release, the branch with significant changes for Kraft 2.0 will be merged to master. These changes will make Kraft ready for sharing documents across private file clouds and with that enable use cases for distributed use via internet, along with other significant feature updates.

Details about the next big release with version number 2.0 can be read on the Github Discussion page.

Any feedback and contribution is highly appreciated.

#649 – OCTOBER 1, 2024
View in Browser »

Python 3.13: Cool New Features for You to Try

In this tutorial, you’ll learn about the new features in Python 3.13. You’ll take a tour of the new REPL and error messages and see how you can try out the experimental free threading and JIT versions of Python 3.13 yourself.
REAL PYTHON

Incremental GC and Pushing Back the 3.13.0 Release

Some last minute performance considerations are delaying the release of Python 3.13 with one of the features being backed out. The new target is next week.
PYTHON.ORG

Debug With pdb and breakpoint()

Python ships with a command-line based debugger called pdb. To set a breakpoint, you call the breakpoint() function in your code. This post introduces you to pdb and debugging from the command-line.
JUHA-MATTI SANTALA

Last Chance to be Part of Snyk’s DevSeccon 2024 Oct 8-9!

Don’t miss out on your chance to register for DevSecCon 2024! From the exciting lineup of 20+ sessions, here’s one that you can’t skip: Ali Diamond, from Hak5: “I’m A Software Engineer, and I Have to Make Bad Security Decisions—why?” Save your spot →
SNYK.IO sponsor

Django Project Ideas

Looking to experiment or build your portfolio? Discover creative Django project ideas for all skill levels, from beginner apps to advanced full-stack projects.
EVGENIA VERBINA

2025 DSF Board Nominations

DJANGO SOFTWARE FOUNDATION

Quiz: Using Python’s pip

REAL PYTHON

Quiz: Python Virtual Environments

REAL PYTHON

Articles & Tutorials Python 3.13 Preview: A Modern REPL

In this tutorial, you’ll explore one of Python 3.13’s new features: a new and modern interactive interpreter, also known as a REPL.
REAL PYTHON

When Should You Upgrade to Python 3.13?

This post talks about the pros and cons of upgrading to Python 3.13 and why you might do it immediately or wait for the first patch release in December.
ITAMAR TURNER-TRAURING

Refactoring Python With Tree-Sitter & Jedi

Jack was toying around with a refactor where he wanted to replace a variable name across a large number of files. His usual tools of grep and sed weren’t sufficient, so he tried tree-sitter instead. Associated HN Discussion.
JACK EVANS

rerankers: A Lightweight Library to Unify Ranking Methods

Information retrieval often uses a two-stage pipeline, where the first stage does a quick pass and the second re-ranks the content. This post talks about re-ranking, the different methods out there, and introduces a Python library to help you out.
BENJAMIN CLAVIE

Counting Sheeps With Contracts in Python

A code contract is a way of specifying how your code is supposed to perform. They can be useful for tests and to generally reduce the number of bugs in your code. This article introduces you to the concept and the dbc library.
LÉO GERMOND

Paying Down Tech Debt: Further Learnings

Technical debt is the accumulation of design decisions that eventually slow teams down. This post talks about two ways to pay it down: using tech debt payments to get into the flow, and what you need before doing a big re-write.
GERGELY OROSZ

Asyncio gather() in the Background

The asyncio.gather() method works as the meeting point for multiple co-routines, but it doesn’t have to be a synchronous call. This post teaches you how to use .gather() in the background.
JASON BROWNLEE

Advanced Python import Techniques

The Python import system is as powerful as it is useful. In this in-depth video course, you’ll learn how to harness this power to improve the structure and maintainability of your code.
REAL PYTHON course

Mentors

Ryan just finished his second round mentoring with the Djangonaut.Space program. This post talks about both how you can help your mentor help you, and how to be a good mentor.
RYAN CHELEY

Customising Object Creation With __new__

The dunder method __new__ is used to customise object creation and is a core stepping stone in understanding metaprogramming in Python.
RODRIGO GIRÃO SERRÃO

Prompting a User for Input

This short post shows you how to prompt your users for input with Python’s built-in input() function.
TREY HUNNER

When and How to Start Coding With Kids

Talk Python interviews Anna-Lena Popkes and they talk about how and when to teach coding to children.
TALK PYTHON podcast

Projects & Code g1: Using Llama-3.1 to Create Reasoning Chains

GITHUB.COM/BKLIEGER-GROQ

DSPy: Framework for Programming Foundation Models

GITHUB.COM/STANFORDNLP

TikTokAutoUploader: Auto Upload and Schedule TikToks

GITHUB.COM/HAZIQ-EXE

tinystatus: Tiny Status Page Generated by a Python Script

GITHUB.COM/HARSXV

django-appointment: Manage Appointment Scheduling

GITHUB.COM/ADAMSPD

Events Weekly Real Python Office Hours Q&A (Virtual)

October 2, 2024
REALPYTHON.COM

PyConZA 2024

October 3 to October 5, 2024
PYCON.ORG

Canberra Python Meetup

October 3, 2024
MEETUP.COM

Sydney Python User Group (SyPy)

October 3, 2024
SYPY.ORG

PyCon ES 2024

October 4 to October 6, 2024
PYCON.ORG

Django Day Copenhagen 2024

October 4 to October 5, 2024
DJANGODAY.DK

PyCon Uganda 2024

October 9 to October 14, 2024
PYCON.ORG

PyCon NL 2024

October 10 to October 11, 2024
PYCON.ORG

Happy Pythoning!
This was PyCoder’s Weekly Issue #649.
View in Browser »

[ Subscribe to 🐍 PyCoder’s Weekly 💌 – Get the best Python news, articles, and tutorials delivered to your inbox once a week >> Click here to learn more ]

Read more

Dries mentioned the comparison towards the Sagrada Familia in the Driesnote in Barcelona and this really resonated with me. Especially after visiting it after Drupalcon. I thought I'd take the comparison a little further, you know, for the fun of it :)

Here we go:

Drupal and the Sagrada FamíliadrupalTuesday, October 1, 2024 - 21:26

We invite you to join us in just two days time, on October 3 at 5:00 pm CEST (11:00 am EDT), for a livestream shining a spotlight on Python 3.13 and the trends shaping its development.

Our speakers:

• Łukasz Langa, CPython Developer in Residence, release manager for Python 3.8–3.9, and creator of Black.
• Tania Allard, Vice-chair of the PSF board, PSF fellow, and Director at Quansight Labs.

They will discuss the most notable features of Python 3.13 and examine the industry trends likely to influence its future. This is a great opportunity to get ahead of the release and ask your questions directly to the experts.

Don’t forget to enable YouTube notifications and mark your calendar.

A few weeks ago I attended Open Source Summit Europe 2024, an event organized by the Linux Foundation, that brought together brilliant developers, technologists and leaders from all over the world, reinforcing what Open Source is truly about—collaboration, innovation and community.

I had the honor of leading a session that tackled one of the most critical challenges in the Open Source movement today—defining what it means for AI to be “Open Source.” Along with OSI Board Director Justin Colannino, we presented the v.0.0.9 for the Open Source AI Definition. This session marked an important milestone for both the Open Source Initiative (OSI) and the broader community, a moment that encapsulated years of collaboration, learning and exploration.

The story behind the Open Source AI Definition

Our session, titled “The Open Source AI Definition Is (Almost) Ready” was more than just a talk—it was an interactive dialogue. As Justin kicked off the session, he captured the essence of the journey we’ve been on. OSI has been grappling with what it means to call AI systems, models and weights “Open Source.” This challenge comes at a time when companies and even regulations are using the term without a clear, agreed-upon definition.

From the outset, we knew we had to get it right. The Open Source values that have fueled so much software innovation—transparency, collaboration, freedom—needed to be the foundation for AI as well. But AI isn’t like traditional software, and that’s where our challenge began.

The origins: a podcast and a vision

When I first became Executive Director of OSI, I pitched the idea of exploring how Open Source principles apply to AI. We spent months strategizing, and the more we dove in, the more we realized how complex the task would be. We didn’t know much about AI at the time, but we were eager to learn. We turned to experts from various fields—a copyright lawyer, an ethicist, AI pioneers from Eleuther AI and Debian ML, and even an AI security expert from DARPA. Those conversations culminated in a podcast we created called Deep Dive AI, which I highly recommend to anyone interested in this topic.

Through those early discussions, it became clear that AI and machine learning are not software in the traditional sense. Concepts like “source code,” which had been well-defined in software thanks to people like Richard Stallman and the GNU GPL, didn’t apply 1:1 to AI. We didn’t even know what the “program” was in AI, nor could we easily determine the “preferred form for making modifications”—a cornerstone of Open Source licensing. 

This realization sparked the need to adapt the Open Source principles we all know so well to the unique world of AI.

Co-designing the future of Open Source AI

Once we understood the scope of the challenge, we knew that creating this definition couldn’t be a solo endeavor. It had to be co-designed with the global community. At the start of 2023, we had limited resources—just two full-time staff members and a small budget. But that didn’t stop us from moving forward. We began fundraising to support a multi-stakeholder, global conversation about what Open Source AI should look like.

We brought on Mer Joyce, a co-design expert who introduced us to creative methods that ensure decisions are made with the community, not for it. With her help, we started breaking the problem into smaller pieces and gathering insights from volunteers, AI experts and other stakeholders. Over time, we began piecing together what would eventually become v.0.0.9 of the Open Source AI Definition.

By early 2024, we had outlined the core principles of Open Source AI, drawing inspiration from the free software movement. We relied heavily on foundational texts like the GNU Manifesto and the Four Freedoms of software. From there, we built a structure that mirrored the values of freedom, collaboration and openness, but tailored specifically to the complexities of AI.

Addressing the unique challenges of AI

Of course, defining the freedoms was only part of the battle. AI and machine learning systems posed new challenges that we hadn’t encountered in traditional software. One of the key questions we faced was: What is the preferred form for making modifications in AI? In traditional software, this might be source code. But in AI, it’s not so straightforward. We realized that the “weights” of machine learning models—those parameters fine-tuned by data—are crucial. However, data itself doesn’t fit neatly into the Open Source framework.

This was a major point of discussion during the session. Code and weights need to be covered by an OSI-approved license because they represent the modifiable core of AI systems. However, data doesn’t meet the same criteria. Instead, we concluded that while data is essential for understanding and studying the system, it’s not the “preferred form” for making modifications. Instead, the data information and code requirements allow Open Source AI systems to be forked by third-party AI builders downstream using the same information as the original developers. These forks could include removing non-public or non-open data from the training dataset, in order to retrain a new Open Source AI system on fully public or open data. This insight was shaped by input from the community and experts who joined our study groups and voted on various approaches.

The road ahead: a collaborative future

As we wrap up this phase, the next step is gathering even more feedback from the community. The definition isn’t final yet, and it will continue to evolve as we incorporate insights from events like this summit. I’m incredibly grateful for the thoughtful comments we’ve already received from people all over the world who have helped guide us along this journey.

At the core of this project is the belief that Open Source AI should reflect the same values that have made Open Source a force for good in software development. We’re not there yet, but together, we’re building something that will have a lasting impact—not just on AI, but on the future of technology as a whole.

I want to thank everyone who has contributed to this project so far. Your dedication and passion are what make Open Source so special. Let’s continue to shape the future of AI, together.

Data cleaning, exploration, and visualization are some of the most time-consuming tasks for data scientists. Nearly 50% of data specialists dedicate 30% or more of their time to data preparation. The pandas and Polars libraries are widely used for these purposes, each offering unique advantages. PyCharm supports both libraries, enabling users to efficiently explore, clean, and visualize data, even with large datasets.

In this blog post, you’ll discover how PyCharm’s interactive tables can enhance your productivity when working with either Polars or pandas. You will also learn how to perform many different data exploration tasks without writing any code and how to use JetBrains AI Assistant for data analysis.

Getting started 

To start using pandas for data analysis, import the library and load data from a file using pd.read_csv(“FileName”), or drag and drop a CSV file into a Jupyter notebook. If you’re using Polars, import the library and use pl.read_csv(“FileName/path to the file”) to load data into a DataFrame. Then, print the dataset just by using the name of the variable.

PyCharm’s interactive tables – key features and uses Browse, sort, and view datasets

Interactive tables offer a wide range of features that allow you to easily explore your data. For example, you can navigate through your data with infinite horizontal and vertical scrolling, use single and multiple column sorting, and many other features.

This feature allows you to sort columns alphabetically or maintain the existing column order. You can also find specific columns by typing the column name in the Column List menu. Through the context menu or Column List, you can selectively hide or display columns. For deeper analysis, you can hide all but the essential columns or use the Hide Other Columns option to focus on a single column.

Finally, you can open your dataframe in a separate window for even more in-depth analysis.

Explore your data 

You can easily understand data types directly from column headers. For example, is used for a data type object, while indicates numeric data.

Additionally, you can access descriptive statistics by hovering over column headers in Compact mode or view them directly in Detailed mode, where distribution histograms are also available.

Create code-free data visualizations

Interactive tables also offer several features available in the Chart view section.

• No-code chart creation, allowing you to visualize data effortlessly.

• Ability to compare graphs.

• Ability to save your charts with one click.

Use AI Assistant for data analysis and visualization

You can access the AI Assistant in the upper-left corner of the tables for the following purposes:

• To access insights about your data quickly with AI Assistant.

• Use AI Assistant to visualize your data.

Using interactive tables for reliable Exploratory Data Analysis (EDA) Why is EDA important? 

Exploratory Data Analysis (EDA) is a crucial step in data science, as it allows data scientists to understand the underlying structure and patterns within a dataset before applying any modeling techniques. EDA helps you identify anomalies, detect outliers, and uncover relationships among variables – all of which are essential for making informed decisions.

Interactive tables offer many features that allow you to explore your data faster and get reliable results.

Spotting statistics, patterns, and outliers  Viewing the dataset information

Let’s look at a real-life example of how the tables could boost the productivity of your EDA. For this example, we will use the Bengaluru House Dataset. Normally we start with an overview of our data. This includes just viewing it to understand the size of the dataset, data types of the columns, and so on. While you can certainly do this with the help of code, using interactive tables allows you to get this data without code. So, in our example, the size of the dataset is 13,320 rows and 9 columns, as you can see in the table header.

Our dataset also contains different data types, including numeric and string data. This means we can use different techniques for working with data, including correlation analysis and others.

And of course you can take a look at the data with the help of infinite scrolling and other features we mentioned above.

Performing statistical analysis

After getting acquainted with the data, the next step might be more in-depth analysis of the statistics. PyCharm provides a lot of important information about the columns in the table headers, including missing data, mode, mean, median, and so on.
For example, here we see that many columns have missing data. In the “bath” column, we obviously have an outlier, as the max value significantly exceeds the 95th percentile.

Additionally, data type mismatches, such as “total_sqft” not being a float or integer, indicate inconsistencies that could impact data processing and analysis.

After sorting, we notice one possible reason for the problem: the use of text values in data and ranges instead of normal numerical values.

Analyzing the data using AI

Additionally, if our dataset doesn’t have hundreds of columns, we can use the help of AI Assistant and ask it to explain the DataFrame. From there, we can prompt it with any important questions, such as “What data problems in the dataset should be addressed and how?”

Visualizing data with built-in charting

In some cases, data visualization can help you understand your data. PyCharm interactive tables provide two options for that. The first is Chart View and the second is Generate Visualizations in Chat. 

Let’s say my hypothesis is that the price of a house should be correlated with its total floor area. In other words, the bigger a house is, the more expensive it should be. In this case, I can use a scatter plot in Chart View and discover that my hypothesis is likely correct.

Wrapping up

PyCharm Professional’s interactive tables offer numerous benefits that significantly boost your productivity in data exploration and data cleaning. The tables allow you to work with the most popular data science library, pandas, and the fast-growing framework Polars, without writing any code. This is because the tables provide features like browsing, sorting, and viewing datasets; code-free visualizations; and AI-assisted insights.

Interactive tables in PyCharm not only save your time but also reduce the complexity of data manipulation tasks, allowing you to focus on deriving meaningful insights instead of writing boilerplate code for basic tasks.

Download PyCharm Professional and get an extended 60-day trial by using the promo code “PyCharmNotebooks”. The free subscription is available for individual users only.

Activate your 60-day trial

For more information on interactive tables in PyCharm, check out our related blogs, guides, and documentation:

• Interactive Tables Documentation
• Polars vs. pandas: What’s the Difference?
• How to Move From pandas to Polars

Last month, I traveled to Kenya to attend a conference called State of the Map 2024 (“SotM” for short), which is an annual meetup of OpenStreetMap contributors from all over the world. It was held at the University of Nairobi Towers in Nairobi, from the 6th to the 8th of September.

University of Nairobi.

I have been contributing to OpenStreetMap for the last three years, and this conference seemed like a great opportunity to network with others in the community. As soon as I came across the travel grant announcement, I jumped in and filled the form immediately. I was elated when I was selected for the grant and couldn’t wait to attend. The grant had an upper limit of €1200 and covered food, accommodation, travel and miscellaneous expenses such as visa fee.

Pre-travel tasks included obtaining Kenya’s eTA and getting a yellow fever vaccine. Before the conference, Mikko from the Humanitarian OpenStreetMap Team introduced me to Rabina and Pragya from Nepal, Ibtehal from Bangladesh, and Sajeevini from Sri Lanka. We all booked the Nairobi Transit Hotel, which was within walking distance of the conference venue. Pragya, Rabina, and I traveled together from Delhi to Nairobi, while Ibtehal was my roommate in the hotel.

Our group at the conference.

The venue, University of Nairobi Towers, was a tall building and the conference was held on the fourth, fifth and sixth floors. The open area on the fifth floor of the building had a nice view of Nairobi’s skyline and was a perfect spot for taking pictures. Interestingly, the university had a wing dedicated to Mahatma Gandhi, who is regarded in India as the Father of the Nation.

View of Nairobi's skyline from the open area on the fifth floor. A library in Mahatma Gandhi wing of the University of Nairobi.

The diversity of the participants was mind-blowing, with people coming from a whopping 54 countries. I was surprised to notice that I was the only participant traveling from India, despite India having a large OpenStreetMap community. That said, there were two other Indian participants who traveled from other countries. I finally got to meet Arnalie (from the Phillipines) and Letwin (from Zimbabwe), both of whom I had only met online before. I had met Anisa (from Albania) earlier during DebConf 2023. But I missed Mikko and Honey from the Humanitarian OpenStreetMap Team, whom I knew from the Open Mapping Guru program.

I learned about the extent of OSM use through Pragya and Rabina’s talk; about the logistics of running the OSM Board, in the OSMF (OpenStreetMap Foundation) session; about the Youth Mappers from Sajeevini, about the OSM activities in Malawi from Priscilla Kapolo, and about mapping in Zimbabwe from Letwin. However, I missed Ibtehal’s lightning session. The ratio of women speakers and participants at the conference was impressive, and I hope we can get such gender representation in our Delhi/NCR mapping parties.

One of the conference halls where talks took place.

Outside of talks, the conference also had lunch and snack breaks, giving ample time for networking with others. In the food department, there were many options for a lacto-ovo vegetarian like myself, including potatoes, rice, beans, chips etc. I found out that the milk tea in Kenya (referred to as “white tea”) is usually not as strong compared to India, so I switched to coffee (which is also called “white coffee” when taken with milk). The food wasn’t spicy, but I can’t complain :) Fruit juices served as a nice addition to lunch.

One of the lunch meals served during the conference.

At the end of the second day of the conference, there was a surprise in store for us — a bus ride to the Bao Box restaurant. The ride gave us the experience of a typical Kenyan matatu (privately-owned minibuses used as share taxis), complete with loud rap music. I remember one of the songs being Kraff’s Nursery Rhymes. That day, I was wearing an original Kenyan cricket jersey - one that belonged to Dominic Wesonga, who represented Kenya in four ODIs. This confused Priscilla Kapolo, who asked if I was from Kenya! Anyway, while it served as a good conversation starter, it didn’t attract as much attention as I expected :) I had some pizza and chips there, and later some drinks with Ibtehal. After the party, Piyush went with us to our hotel and we played a few games of UNO.

Minibus which took us from the university to Bao Box restaurant. This minibus in the picture gave a sense of a real matatu.

I am grateful to the organizers Laura and Dorothea for introducing me to Nikhil when I was searching for a companion for my post-conference trip. Nikhil was one of the aforementioned Indian participants, and a wildlife lover. We had some nice conversations; he wanted to go to the Masai Maara Natural Reserve, but it was too expensive for me. In addition, all the safaris were multi-day affairs, and I wasn’t keen on being around wildlife for that long. Eventually I chose to go my own way, exploring the coastal side and visiting Mombasa.

While most of the work regarding the conference was done using free software (including the reimbursement form and Mastodon announcements), I was disappointed by the use of WhatsApp for coordination with the participants. I don’t use WhatsApp and so was left out. WhatsApp is proprietary software (they do not provide the source code) and users don’t control it. It is common to highlight that OpenStreetMap is controlled by users and the community, rather than a company - this should apply to WhatsApp as well.

My suggestion is to use XMPP, which shares similar principles with OpenStreetMap, as it is privacy-respecting, controlled by users, and powered by free software. I understand the concern that there might not be many participants using XMPP already. Although it is a good idea to onboard people to free software like XMPP, we can also create a Matrix group, and bridge it with both the XMPP group and the Telegram group. In fact, using Matrix and bridging it with Telegram is how I communicated with the South Asian participants. While it’s not ideal - as Telegram’s servers are proprietary and centralized - but it’s certainly much better than creating a WhatsApp-only group. The setup can be bridged with IRC as well. On the other hand, self-hosted mailing lists for participants is also a good idea.

Finally, I would like to thank SotM for the generous grant, enabling me to attend this conference, meet the diverse community behind OSM and visit the beautiful country of Kenya. Stay tuned for the blog post on Kenya trip.

Thanks to Sahilister, Contrapunctus, Snehal and Badri for reviewing the draft of this blog post before publishing.

As a Python developer, you’ll have to deal with mutable and immutable objects sooner or later. Mutable objects are those that allow you to change their value or data in place without affecting the object’s identity. In contrast, immutable objects don’t allow this kind of operation. You’ll just have the option of creating new objects of the same type with different values.

In Python, mutability is a characteristic that may profoundly influence your decision when choosing which data type to use in solving a given programming problem. Therefore, you need to know how mutable and immutable objects work in Python.

In this video course, you’ll:

• Understand how mutability and immutability work under the hood in Python
• Explore immutable and mutable built-in data types in Python
• Identify and avoid some common mutability-related gotchas
• Understand and control how mutability affects your custom classes

[ Improve Your Python With 🐍 Python Tricks 💌 – Get a short & sweet Python Trick delivered to your inbox every couple of days. >> Click here to learn more and see examples ]

Maximize your Drupal content creation with CKEditor's advanced features! Join the upcoming webinar on October 16, 2024, at 11:00 AM EDT to learn about the CKEditor 5 Drupal Plugin Pack, advanced editing tools, and productivity enhancements. Drupal developers, content managers, and site administrators will gain practical insights on improving content workflows. Don't miss this opportunity—register today!

Almost all of my Debian contributions this month were sponsored by Freexian.

You can also support my work directly via Liberapay.

Pydantic

My main Debian project for the month turned out to be getting Pydantic back into a good state in Debian testing. I’ve used Pydantic quite a bit in various projects, most recently in Debusine, so I have an interest in making sure it works well in Debian. However, it had been stalled on 1.10.17 for quite a while due to the complexities of getting 2.x packaged. This was partly making sure everything else could cope with the transition, but in practice mostly sorting out packaging of its new Rust dependencies. Several other people (notably Alexandre Detiste, Andreas Tille, Drew Parsons, and Timo Röhling) had made some good progress on this, but nobody had quite got it over the line and it seemed a bit stuck.

Learning Rust is on my to-do list, but merely not knowing a language hasn’t stopped me before. So I learned how the Debian Rust team’s packaging works, upgraded a few packages to new upstream versions (including rust-half and upstream rust-idna test fixes), and packaged rust-jiter. After a lot of waiting around for various things and chasing some failures in other packages I was eventually able to get current versions of both pydantic-core and pydantic into testing.

I’m looking forward to being able to drop our clunky v1 compatibility code once debusine can rely on running on trixie!

OpenSSH

I upgraded the Debian packaging to OpenSSH 9.9p1.

YubiHSM

I upgraded python-yubihsm, yubihsm-connector, and yubihsm-shell to new upstream versions.

I noticed that I could enable some tests in python-yubihsm and yubihsm-shell; I’d previously thought the whole test suite required a real YubiHSM device, but when I looked closer it turned out that this was only true for some tests.

I fixed yubihsm-shell build failures on some 32-bit architectures (upstream PRs #431, #432), and also made it build reproducibly.

Thanks to Helmut Grohne, I fixed yubihsm-connector to apply udev rules to existing devices when the package is installed.

As usual, bookworm-backports is up to date with all these changes.

Python team

setuptools 72.0.0 removed the venerable setup.py test command. This caused some fallout in Debian, some of which was quite non-obvious as packaging helpers sometimes fell back to different ways of running test suites that didn’t quite work. I fixed django-guardian, manuel, python-autopage, python-flask-seeder, python-pgpdump, python-potr, python-precis-i18n, python-stopit, serpent, straight.plugin, supervisor, and zope.i18nmessageid.

As usual for new language versions, the addition of Python 3.13 caused some problems. I fixed psycopg2, python-time-machine, and python-traits.

I fixed build/autopkgtest failures in keymapper, python-django-test-migrations, python-rosettasciio, routes, transmissionrpc, and twisted.

buildbot was in a bit of a mess due to being incompatible with SQLAlchemy 2.0. Fortunately by the time I got to it upstream had committed a workable set of patches, and the main difficulty was figuring out what to cherry-pick since they haven’t made a new upstream release with all of that yet. I figured this out and got us up to 4.0.3.

Adrian Bunk asked whether python-zipp should be removed from trixie. I spent some time investigating this and concluded that the answer was no, but looking into it was an interesting exercise anyway.

On the other hand, I looked into flask-appbuilder, concluded that it should be removed, and filed a removal request.

I upgraded some embedded CSS files in nbconvert.

I upgraded importlib-resources, ipywidgets, jsonpickle, pydantic-settings, pylint (fixing a test failure), python-aiohttp-session, python-apptools, python-asyncssh, python-django-celery-beat, python-django-rules, python-limits, python-multidict, python-persistent, python-pkginfo, python-rt, python-spur, python-zipp, stravalib, transmissionrpc, vulture, zodbpickle, zope.exceptions (adopting it), zope.i18nmessageid, zope.proxy, and zope.security to new upstream versions.

debmirror

The experimental and *-proposed-updates suites used to not have Contents-* files, and a long time ago debmirror was changed to just skip those files in those suites. They were added to the Debian archive some time ago, but debmirror carried on skipping them anyway. Once I realized what was going on, I removed these unnecessary special cases (#819925, #1080168).

It’s been a while since I posted here – I kind of lost momentum over the summer (which is a busy time with a school-aged child) and never really picked it up again.

Anyway, I wanted to write a quick post to tell people that I won two awards at the British Cartographic Society awards ceremony a few weeks ago.

They were both for my British Placename Mapper web app, which is described in more detail in this blog post. If you haven’t seen it already, I strongly recommend you check it out.

I won a Highly Commended certificate in the Avenza Award for Electronic Mapping, and the First Prize trophy for the Ordnance Survey Award (for any map using OS data).

The certificates came in a lovely frame, and the trophy is enormous – about 30cm high and weighing over 3kg!

Here’s the trophy:

I was presented with the trophy at the BCS Annual Conference in London, but they very kindly offered to keep the trophy to save me carrying it across London on my wheelchair and back on the train, so they invited me to Ordnance Survey last week to be presented with it again. I had a lovely time at OS – including 30 minutes with their Director General/CEO and was formally presented with my trophy again (standing in front of the first ever Ordnance Survey map!):

Full information on the BCS awards are available on their website and I strongly recommend submitting any appropriate maps you’ve made for next year’s awards. I need to get my thinking cap on for next year’s entry…